| A10-47E1 Rotek Slewing Ring Bearings | End plug (suffix Y):EPR 13; L:419.1 mm; R2:31.75 mm; Mass pillow block:33.1 kg; P60°:149 kN; N1:22.225 mm; Initial grease fill:481.95 g; P180°:60.9 kN; PG:1/4 NPT; Pa:12.5 kN; Da:200 mm; J1:69.85 mm; Cap bolt recommended tightening torque:203.4 N·m; P120°:55.6 kN; H2:50.8 mm; Stabilizing ring:2 x SR-1522; ba:42.069 mm; Appropriate attachment bolt size G:0.75 in; Cap bolt, SAE grade:5; |
| L6-37P9ZD Rotek Slewing Ring Bearings | P120°:44.5 kN; P150°:40 kN; J1:60.325 mm; N1:22.225 mm; Labyrinth ring:2 x LOR 112; Cap bolt recommended tightening torque:203.4 N·m; Da:180 mm; Max. speed for PosiTrac Plus seal:1350 r/min; Pa:16.7 kN; End plug (suffix Y):EPR 14; H:217.488 mm; Appropriate attachment bolt size G:0.75 in; H2:44.45 mm; J min.:295.275 mm; PG:1/4 NPT; L:387.35 mm; Ca:55.804 mm; R2:30.163 mm; Cap bolt, SAE grade:5; |
| W16-84P1 Rotek Slewing Ring Bearings | dk:40.7 mm; C1 max.:20 mm; l7 min.:34 mm; l2 max.:149 mm; h:110 mm; Basic static load rating C0:81.5 kN; d2 max.:75 mm; B:22 mm; Mass rod end:0.9 kg; G:M 30x2; l1 min.:65 mm; α:6 °; d:30 mm; r1 min.:0.6 mm; Basic dynamic load rating C:62 kN; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; |
| L6-25E9Z Rotek Slewing Ring Bearings | Basic Static Radial Load Rating Co:2520 lbf; Shaft Diameter D:1 1/4 in; Dimension L:4.3750 in; Weight W:1.40 lb; Dimension H:1.1563 in; Dimension G:0.3750 in; Width A:1.6250 in; Dimension J:1.6250 in; Dimension N:0.7813 in; Dimension S1:1.0000 in; Dimension B:4.1250 in; Dimension C:3.5000 in; Insert Bearing IB:ZMaRC; Dimension D2:2.7500 in; Pin Dia A1:0.5313 in; Basic Dynamic Radial Load Rating:4380 lbf; |
| H7-43N1 Rotek Slewing Ring Bearings | S:0.794 mm; B:80.169 mm; J max.:333.375 mm; Limiting speed:2200 r/min; s:38.497 mm; da:100.013 mm; J min.:304.8 mm; Attachment bolt diameter G:19.05 mm; A:114.3 mm; H1:107.95 mm; H2:61.913 mm; H:217.488 mm; Basic dynamic load rating C:426 kN; L:387.35 mm; J1:57.15 mm; Mass bearing unit:22.5 kg; |
| L6-37E9ZD Rotek Slewing Ring Bearings | H1:95.25 mm; Cap bolt:2 x 5/8-11 UNC; da:71.438 mm; H2:31.75 mm; Da:150 mm; J min.:250.825 mm; P90°:36.9 kN; Mass pillow block:17.9 kg; P150°:20.9 kN; Stabilizing ring:SR-17-14; J max.:279.4 mm; Appropriate attachment bolt size G:0.625 in; h:34.925 mm; N1:19.05 mm; J1:53.975 mm; Pa:9.25 kN; End plug (suffix Y):EPR 9; A2:198.438 mm; Max. speed for Taconite seal:1050 r/min; RG:3/8 NPT; |
| 250.15.0300.013 Type 13/4 Standard 5 Slewing Ring Bearings | Db:78 mm; N:12.3 mm; A3:3.2 mm; d:30 mm; A1:15 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A:33 mm; Basic dynamic load rating C:19.5 kN; Hexagonal key size for grub screw N:2.5 mm; J:116.5 mm; d2:48 mm; Fatigue load limit Pu:0.475 kN; s1:23 mm; Recommended tightening torque for grub screw:4.2 N·m; Basic static load rating C0:11.2 kN; A5:20 mm; L:83 mm; Recommended diameter for attachment bolts, mm G:10 mm; |
| A8-39E12 Rotek Slewing Ring Bearings | d:100 mm; B:30 mm; Mass inner ring:0.35 kg; F:110 mm; r, r1,2 min.:1.1 mm; |
| 3R6-71N9 Rotek Slewing Ring Bearings | d3:155 mm; B1:80 mm; Fatigue load limit Pu:2.24 kN; Calculation factor Y0:3.6; D:230 mm; C1:1.322 mm; Reference speed:5600 r/min; da max.:163 mm; Basic static load rating C0:58.5 kN; ra max.:3 mm; Mass bearing + adapter sleeve:11.1 kg; Calculation factor Y1:3.3; Da max.:216 mm; Calculation factor Y2:5.1; Ba min.:15 mm; Permissible angular misalignment α:2.5 °; r1,2 min.:3 mm; B4:23 mm; B:46 mm; |
| A22-98P1 Rotek Slewing Ring Bearings | Design variant/feature:TDI/Y2; Comparative radial load rating CF:830 kN; Basic dynamic load rating C:3380 kN; Thrust factor K:1.76; d:368.3 mm; B:185.738 mm; Calculation factor e:0.33; Mass bearing:133 kg; r1,2 min.:3.3 mm; Comparative axial load rating CFa:273 kN; Calculation factor Y0:2; Basic static load rating C0:7500 kN; T:185.738 mm; r3,4 min.:6.4 mm; d1 ≈:401 mm; Calculation factor Y2:3; |