| 61.20.0414.500.01.1503 Standard 5 Slewing Ring Bearings | Sealed Speed Rating n3:4300 rpm; Oil Speed Rating n2:7500 rpm; Basic Dynamic Radial Load Rating C:43600 N; Grease Speed Rating Open/Shielded n1:6300 rpm; Basic Static Radial Load Rating Co:29000 N; Accessories:Without Accessories; d:55.000 mm; Fillet Radius ra:1.50 mm; B:21.00 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating n1:6300 rpm; D:100.0000 mm; |
| R8-46E3 Rotek Slewing Ring Bearings | Fillet Radius ra:2.00 mm; Speed Rating-Open and Shielded-Oil OSO:12000 rpm; Type:200-RDM Series (from; D:170.0000 mm; B:32.00 mm; Basic Radial Load Rating-Dynamic DC:138000 N; Fillet Radius rb:1.00 mm; Speed Rating-Open and Shielded-Grease OSG:8300 rpm; d:95.000 mm; Basic Radial Load Rating-Static SCO:125000 N; |
| 250.15.0300.013 Type 13/4 Standard 5 Slewing Ring Bearings | Db:78 mm; N:12.3 mm; A3:3.2 mm; d:30 mm; A1:15 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A:33 mm; Basic dynamic load rating C:19.5 kN; Hexagonal key size for grub screw N:2.5 mm; J:116.5 mm; d2:48 mm; Fatigue load limit Pu:0.475 kN; s1:23 mm; Recommended tightening torque for grub screw:4.2 N·m; Basic static load rating C0:11.2 kN; A5:20 mm; L:83 mm; Recommended diameter for attachment bolts, mm G:10 mm; |
| A12-27E3 Rotek Slewing Ring Bearings | Basic dynamic load rating C:616 kN; r3,4 min.:0.6 mm; D3:196 mm; Snap ring in accordance with DIN 471:200x4; D:200 mm; d:130 mm; -:0.2 mm; Ca2:75 mm; Mass bearing:10.5 kg; das:150 mm; K:4 mm; Fatigue load limit Pu:120 kN; +:0.2 mm; C2:5.4 mm; C1:83.2 mm; C:94 mm; b:4.2 mm; Limiting speed:630 r/min; Calculation factor kr:0.4; da min.:137 mm; |
| 162.20.0450.891.21.1503 Standard 5 Slewing Ring Bearings | da max.:230 mm; Fatigue load limit Pu:88 kN; Mass bearing:14.6 kg; Calculation factor kr:0.15; r1,2 min.:4 mm; Axial load factor Y:0.6; Limiting speed:3600 r/min; Basic static load rating C0:850 kN; Reference speed:2200 r/min; ra max.:3 mm; Fw:217 mm; D:320 mm; C:52 mm; Basic dynamic load rating C:720 kN; Da max.:302.2 mm; Limiting value e:0.2; D1 ≈:278.6 mm; |
| A18-46E4D Rotek Slewing Ring Bearings | Q120°:620 kN; Housing:FSNL 524-620 RU; N4 max.:8 mm; Da:215 mm; Ca:86 mm; Bearing (basic designation):21320 K; H2:45 mm; L:410 mm; P120°:350 kN; P0°:800 kN; Oil level, min.:51 mm; H:271 mm; Appropriate attachment bolt, size G:16 mm; da:90 mm; Cap bolt, size:M 20x100; Eye bolt, size:2 x M 10; J1:70 mm; A1:120 mm; J6:378 mm; P180°:400 kN; |
| M6-39P1Z Rotek Slewing Ring Bearings | d:180.000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:168000 N; Basic Static Radial Load Rating Co:212000 N; Oil Speed Rating n2:2800 rpm; Fillet Radius rb:1.00 mm; B:33.00 mm; Grease Speed Rating n1:2200 rpm; D:250.0000 mm; |
| A12-125P1 Rotek Slewing Ring Bearings | D:420 mm; Dynamic (Cr):9 mm; B:106 mm; Static (Cor):16.7 mm; with cylindrical bore:850 min-1; rs (min):4 mm; Grease:3060 kN; with tapered bore:1 100 min-1; Pu:1820 kN; d:280 mm; Oil:256.260 kN; |
| R8-42E3 Rotek Slewing Ring Bearings | Appropriate attachment bolt size G:1 in; P150°:85.9 kN; H2:60.325 mm; Stabilizing ring:SR-28-0; P90°:149 kN; R1:87.313 mm; PG:1/4 NPT; h:51.594 mm; H1:152.4 mm; Cap bolt, SAE grade:5; RG:3/4 NPT; Initial grease fill:481.95 g; L:511.175 mm; End plug (suffix Y):EPR 27; P120°:94.3 kN; Da:250 mm; da:122.237 mm; P60°:249 kN; ba:61.119 mm; J max.:441.325 mm; |
| M5-34P1 Rotek Slewing Ring Bearings | A:10 mm; Hydraulic nut:HMV 112 E; d1:500 mm; B2:337 mm; B1:325 mm; G2:G 1/4; G1:53 mm; G:Tr 560x6; d:530 mm; Mass withdrawal sleeve:93.5 kg; |