| A24-107N1 Rotek Slewing Ring Bearings | Da:259.999 mm; H1:152.4 mm; P150°:105 kN; A1:149.225 mm; P60°:301 kN; h:44.45 mm; Mass pillow block:92 kg; Labyrinth ring:2 x LOR 140; Cap bolt recommended tightening torque:813.5 N·m; Housing:SSAFS 034 KA; P120°:116 kN; Ca:86.614 mm; Bearing limiting speed:2800 r/min; Pa:34 kN; P90°:180 kN; ba:64.294 mm; Cap bolt, SAE grade:8; L:511.175 mm; Initial grease fill:481.95 g; R1:87.313 mm; |
| A12-125P1 Rotek Slewing Ring Bearings | D:420 mm; Dynamic (Cr):9 mm; B:106 mm; Static (Cor):16.7 mm; with cylindrical bore:850 min-1; rs (min):4 mm; Grease:3060 kN; with tapered bore:1 100 min-1; Pu:1820 kN; d:280 mm; Oil:256.260 kN; |
| A12-32P2 Rotek Slewing Ring Bearings | Mass inner ring:0.04 kg; d:30 mm; r, r1,2 min.:0.3 mm; F:35 mm; B:20.5 mm; |
| L6-25P9Z Rotek Slewing Ring Bearings | B:60.00 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:305000 N; D:265.0000 mm; Grease Speed Rating n1:2500 rpm; d:100.000 mm; Oil Speed Rating n2:3100 rpm; Basic Dynamic Radial Load Rating C:260000 N; |
| R9-55E3 Rotek Slewing Ring Bearings | L:127 mm; Mass bearing unit:0.6 kg; Basic static load rating C0:6.55 kN; H1:33.3 mm; B1:43.7 mm; Housing:SY 504 M/VZ033; H2:14 mm; N1:11.5 mm; A:32 mm; Recommended diameter for attachment bolts, inch G:0.375 in; H:64.5 mm; N4:2 mm; s1:26.6 mm; Hexagonal key size for grub screw N:3 mm; J7:11.5 mm; J6:118 mm; Thread grub screw G2:M6x0.75; N:20.5 mm; J max.:106 mm; A1:21 mm; |
| M4-34P4Z Rotek Slewing Ring Bearings | Housing:FSAF 520; R2:30.163 mm; L:387.35 mm; Max. speed for PosiTrac Plus seal:1650 r/min; Initial grease fill:365.71 g; End plug (suffix Y):EPR 12; Labyrinth ring:2 x LOR 100; J1:60.325 mm; H2:44.45 mm; J min.:295.275 mm; PosiTrac Plus contact element:2 x B10724-102; Appropriate attachment bolt size G:0.75 in; P150°:40 kN; PG:1/4 NPT; ba:38.894 mm; Pa:10.2 kN; Cap bolt, SAE grade:5; da:84.138 mm; |
| L6-25N9Z Rotek Slewing Ring Bearings | Basic dynamic load rating C:3800 kN; D1:565 mm; B:45 mm; Limiting speed:340 r/min; Mass bearing:187 kg; r1,2 min.:5 mm; Minimum axial load factor A:32; d:560 mm; ra max.:4 mm; Da max.:611 mm; D:750 mm; d1:745 mm; Reference speed:170 r/min; da min.:741 mm; Basic static load rating C0:20000 kN; Fatigue load limit Pu:1270 kN; H:150 mm; |
| W14-60P1 Rotek Slewing Ring Bearings | Static (Cor):22.3 mm; d:560 mm; with tapered bore:400 min-1; Grease:10690 kN; Oil:730.310 kN; Dynamic (Cr):12 mm; Pu:5110 kN; B:195 mm; D:820 mm; with cylindrical bore:320 min-1; rs (min):6 mm; |
| A16-86P1 Rotek Slewing Ring Bearings | Limiting speed:13000 r/min; Basic dynamic load rating C:19.8 kN; Ew:40 mm; Fatigue load limit Pu:4.65 kN; Fw:35 mm; Reference speed:12000 r/min; Mass needle roller and cage assembly:0.021 kg; Basic static load rating C0:39 kN; U:17 mm; |
| L9-57P9Z Rotek Slewing Ring Bearings | N max.:55 mm; h1:65 mm; l7 min.:26 mm; B:25 mm; G:M 20x1.5; r1 min.:0.6 mm; d2 max.:62 mm; Material constant KM:330; l3 min.:29 mm; N1 max.:20 mm; C1 max.:22 mm; Specific dynamic load factor K:100 N/mm²; Mass rod end:0.66 kg; d4 max.:31 mm; Basic dynamic load rating C:48 kN; Tightening torque bolt with internal hexagon:23 N·m; Basic static load rating C0:69.5 kN; l4 max.:97 mm; α:4 °; |