| 3R10-111N2F Rotek Slewing Ring Bearings | r1,2 min.:6 mm; B:41 mm; Mass shaft washer:32.2 kg; d1:420 mm; d:220 mm; |
| M5-34P1Z Rotek Slewing Ring Bearings | B4:6 mm; L1:89 mm; Thread grub screw G2:5/16-24 UNF; Basic dynamic load rating C:25.5 kN; T:47.1 mm; A:36.5 mm; Bearing:YAR 207-106-2RF/VE49; H1:60.3 mm; N:13.1 mm; d:34.925 mm; J1:31.8 mm; Basic static load rating C0:15.3 kN; Recommended diameter for attachment bolts, inch G:0.5 in; Hexagonal key size for grub screw N:3.969 mm; J:50.8 mm; Recommended diameter for attachment bolts, mm G:12 mm; Limiting speed with shaft tolerance h6:3200 r/min; |
| W17-108P1 Rotek Slewing Ring Bearings | Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; d:45 mm; Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; Mass bushing:0.098 kg; D:51 mm; B:35 mm; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; |
| A12-125P1 Rotek Slewing Ring Bearings | D:420 mm; Dynamic (Cr):9 mm; B:106 mm; Static (Cor):16.7 mm; with cylindrical bore:850 min-1; rs (min):4 mm; Grease:3060 kN; with tapered bore:1 100 min-1; Pu:1820 kN; d:280 mm; Oil:256.260 kN; |
| 232.21.0475.013 Type 21/520.2 Standard 5 Slewing Ring Bearings | Bearing designation:16007 ; Grease:10 600 min-1; Weight:0.111 kg; B:9 mm; Dynamic (Cr):9.960 kN; ra:0.3 max; Pu:0.335 kN; Da:60 max; rs:0.3 mm; Oil:12 600 min-1; d:35 mm; da:37 min; Static (Cor):7.362 kN; D:62 mm; |
| L6-37P9Z Rotek Slewing Ring Bearings | Calculation factor Y0:1.8; Calculation factor Y1:1.9; ra max.:2.5 mm; Da max.:246 mm; B4:22 mm; r1,2 min.:3 mm; D:260 mm; d3:155 mm; B:86 mm; b:13.9 mm; Fatigue load limit Pu:100 kN; Basic static load rating C0:1120 kN; Reference speed:2000 r/min; K:7.5 mm; Calculation factor Y2:2.9; D1 ≈:216 mm; Limiting speed:2600 r/min; d2 ≈:152 mm; da max.:152 mm; db min.:131 mm; |
| 250.14.0400.013 Type 13/5 Standard 5 Slewing Ring Bearings | Fw:265 mm; Basic static load rating C0:850 kN; Fatigue load limit Pu:83 kN; Limiting speed:1700 r/min; Ew:280 mm; Basic dynamic load rating C:242 kN; Mass needle roller and cage assembly:1.81 kg; Reference speed:1500 r/min; U:50 mm; |
| A14-24P1A Rotek Slewing Ring Bearings | D:279.4 mm; T:46.038 mm; Da min.:254 mm; d:198.298 mm; Dimension series:67900; ra max.:3.5 mm; Fatigue load limit Pu:76.5 kN; Basic dynamic load rating C:465 kN; B:49.212 mm; C:36.512 mm; d1 ≈:246.4 mm; Reference speed:1600 r/min; Calculation factor Y:1.2; Calculation factor Y0:0.7; Mass bearing:9.18 kg; da max.:223 mm; a:60.556 mm; r3,4 min.:3.3 mm; Da max.:264.5 mm; Limiting speed:2000 r/min; |
| W13-49P1 Rotek Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:216000 N; Accessories:One Shield & Snap-Ri; Fillet Radius ra:2.00 mm; D:310.0000 mm; Grease Speed Rating Open/Shielded n1:1900 rpm; Oil Speed Rating Open/Shielded n2:2400 rpm; d:200.000 mm; Basic Static Radial Load Rating Co:245000 N; B:51.00 mm; Sealed Speed Rating n3:1300 rpm; |
| A10-47E1 Rotek Slewing Ring Bearings | End plug (suffix Y):EPR 13; L:419.1 mm; R2:31.75 mm; Mass pillow block:33.1 kg; P60°:149 kN; N1:22.225 mm; Initial grease fill:481.95 g; P180°:60.9 kN; PG:1/4 NPT; Pa:12.5 kN; Da:200 mm; J1:69.85 mm; Cap bolt recommended tightening torque:203.4 N·m; P120°:55.6 kN; H2:50.8 mm; Stabilizing ring:2 x SR-1522; ba:42.069 mm; Appropriate attachment bolt size G:0.75 in; Cap bolt, SAE grade:5; |