| 3R6-49N9 Rotek Slewing Ring Bearings | Static axial stiffness, preload class A:46 N/µm; Calculation factor f0:8.2; Calculation factor f1:1; ra max.:1 mm; r3,4 min.:0.6 mm; B:16 mm; Static axial stiffness, preload class C:98 N/µm; db max.:57.3 mm; Preload class A GA:85 N; d1:60.25 mm; da min.:54.6 mm; Static axial stiffness, preload class B:72 N/µm; db min.:54.6 mm; Da max.:75.4 mm; Attainable speed for grease lubrication:30000 r/min; |
| 3R8-110N1 Rotek Slewing Ring Bearings | R2:42.069 mm; Initial grease fill:1672.65 g; P90°:249 kN; S:4.763 mm; Ca:101.803 mm; P120°:151 kN; h:61.913 mm; Da:339.999 mm; Labyrinth ring:2 x LOR 154; RG:1 NPT; Pa:52.5 kN; A1:190.5 mm; Housing:SSAFS 538; H2:79.375 mm; Eye bolt:2 x 1/2-13 UNC; A2:276.225 mm; H1:200.025 mm; P60°:416 kN; L:711.2 mm; Cap bolt:1 1/8-7 UNC; |
| A12-32P2 Rotek Slewing Ring Bearings | Mass inner ring:0.04 kg; d:30 mm; r, r1,2 min.:0.3 mm; F:35 mm; B:20.5 mm; |
| A16-56N5 Rotek Slewing Ring Bearings | B:54.00 mm; d:60.000 mm; Basic Static Radial Load Rating Co:95000 N; Fillet Radius ra:2.00 mm; D:130.0000 mm; Grease Speed Rating n1:3400 rpm; Oil Speed Rating n2:4500 rpm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:3400 rpm; Basic Dynamic Radial Load Rating C:121000 N; |
| 3R8-79N9 Rotek Slewing Ring Bearings | D1:105 mm; Specific dynamic load factor K:10 N/mm²; d:80 mm; Permissible sliding velocity v max.:5 m/s; D:95 mm; B:70 mm; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; B1:8 mm; Permissible sliding velocity v min.:0.25 m/s; Tolerance shaft:h8; Mass bushing:0.97 kg; |
| W14-60P1 Rotek Slewing Ring Bearings | Static (Cor):22.3 mm; d:560 mm; with tapered bore:400 min-1; Grease:10690 kN; Oil:730.310 kN; Dynamic (Cr):12 mm; Pu:5110 kN; B:195 mm; D:820 mm; with cylindrical bore:320 min-1; rs (min):6 mm; |
| L9-57E9Z Rotek Slewing Ring Bearings | Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Calculation factor (single, tandem) Y0:0.38; Calculation factor f1:0.99; d1:112.38 mm; D1:127.61 mm; Calculation factor f2A:1; Calculation factor f2B:1.03; Db max.:139.4 mm; Da max.:138 mm; Static axial stiffness, preload class B:319 N/µm; Calculation factor (single, tandem) X2:0.41; |
| A18-89P1 Rotek Slewing Ring Bearings | s1 max.:47.3 mm; Mass bearing + sleeve:780 kg; da min.:725 mm; Misalignment factor k1:0.119; Ca min.:3.2 mm; Reference speed:400 r/min; B2 ≈:302 mm; Da min.:908 mm; B:236 mm; d2 ≈:806 mm; B1:286 mm; Limiting speed:560 r/min; Basic dynamic load rating C:8800 kN; Da max.:1002 mm; D:1030 mm; r1,2 min.:7.5 mm; D1 ≈:946 mm; G:Tr 750x7; G1:50 mm; da max.:853 mm; |
| A8-41E1 Rotek Slewing Ring Bearings | Grease Speed Rating n1:3600 rpm; Basic Static Radial Load Rating Co:108000 N; Basic Dynamic Radial Load Rating C:108000 N; d:65.000 mm; D:120.0000 mm; Fillet Radius ra:1.50 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:4800 rpm; B:46.00 mm; |
| 3R16-220N1 Rotek Slewing Ring Bearings | RG:3/8 NPT; L:387.35 mm; Cap bolt recommended tightening torque:298.3 N·m; P150°:48 kN; PG:1/4 NPT; Labyrinth ring:2 x LOR 102; Cap bolt, SAE grade:8; End plug (suffix Y):EPR 12; P180°:57.4 kN; H1:114.3 mm; Da:180 mm; R1:58.737 mm; A1:111.125 mm; P60°:141 kN; Cap bolt:5/8-11 UNC; Mass pillow block:21.8 kg; P90°:84.5 kN; Stabilizing ring:SR-20-17; H:222.25 mm; Pa:13.8 kN; |