| L9-46P9Z Rotek Slewing Ring Bearings | B1:2 mm; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; D:8 mm; Tolerance shaft:h8; Specific dynamic load factor K:10 N/mm²; D1:12 mm; d:4 mm; Coefficient of friction µ max.:0.1; B:6 mm; Tolerance housing:H7; Mass bushing:0.0014 kg; |
| 162.20.0450.891.21.1503 Standard 5 Slewing Ring Bearings | da max.:230 mm; Fatigue load limit Pu:88 kN; Mass bearing:14.6 kg; Calculation factor kr:0.15; r1,2 min.:4 mm; Axial load factor Y:0.6; Limiting speed:3600 r/min; Basic static load rating C0:850 kN; Reference speed:2200 r/min; ra max.:3 mm; Fw:217 mm; D:320 mm; C:52 mm; Basic dynamic load rating C:720 kN; Da max.:302.2 mm; Limiting value e:0.2; D1 ≈:278.6 mm; |
| A22-105E2A Rotek Slewing Ring Bearings | d1:746 mm; Mass bearing:62 kg; d:630 mm; Fatigue load limit Pu:695 kN; D:750 mm; r1,2 min.:3 mm; Basic static load rating C0:11200 kN; H:73 mm; B:21.5 mm; Reference speed:240 r/min; Da max.:660 mm; Basic dynamic load rating C:1630 kN; Minimum axial load factor A:10; da min.:720 mm; Limiting speed:480 r/min; ra max.:2.5 mm; D1:634 mm; |
| R8-35E3 Rotek Slewing Ring Bearings | Fatigue load limit Pu:49 kN; r1,2 min.:3 mm; Reference speed:560 r/min; Minimum load factor A:60; da min.:663 mm; Mass bearing (including seat washer where applicable):48 kg; Da max.:647 mm; D:710 mm; ra max.:2.5 mm; Limiting speed:800 r/min; Basic dynamic load rating C:475 kN; D1 ≈:604 mm; Basic static load rating C0:3400 kN; d:600 mm; H:67 mm; d1 ≈:706 mm; |
| R9-59N3 Rotek Slewing Ring Bearings | Limiting speed:1400 r/min; Mass bearing + sleeve:109 kg; d2 ≈:301 mm; b:16.7 mm; B1:190 mm; Basic dynamic load rating C:2664 kN; K:9 mm; Calculation factor Y2:3.3; d1:240 mm; Fatigue load limit Pu:290 kN; D1 ≈:380 mm; Ba min.:11 mm; Reference speed:1100 r/min; Da max.:423 mm; B4:39 mm; Calculation factor e:0.31; r1,2 min.:4 mm; ra max.:3 mm; Calculation factor Y0:2.2; D:440 mm; |
| A4-23P2A Rotek Slewing Ring Bearings | Tolerance shaft:e7; Permissible sliding velocity v max.:0.5 m/s; d:65 mm; α:124 °; Mass bushing:1.81 kg; h:66.5 mm; D:80 mm; Tolerance housing:H7; Specific static load factor K0:45 N/mm²; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15; a:6 mm; B:120 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; |
| L6-37P9ZD Rotek Slewing Ring Bearings | P120°:44.5 kN; P150°:40 kN; J1:60.325 mm; N1:22.225 mm; Labyrinth ring:2 x LOR 112; Cap bolt recommended tightening torque:203.4 N·m; Da:180 mm; Max. speed for PosiTrac Plus seal:1350 r/min; Pa:16.7 kN; End plug (suffix Y):EPR 14; H:217.488 mm; Appropriate attachment bolt size G:0.75 in; H2:44.45 mm; J min.:295.275 mm; PG:1/4 NPT; L:387.35 mm; Ca:55.804 mm; R2:30.163 mm; Cap bolt, SAE grade:5; |
| M5-40P1 Rotek Slewing Ring Bearings | B:7 mm; D:68 mm; D1:37 mm; Mass housing washer:0.14 kg; r1,2 min.:1 mm; |
| 62.20.0400.000.11.1503 Standard 5 Slewing Ring Bearings | Limiting speed:1500 r/min; Basic dynamic load rating C:297 kN; r1,2 min.:1.1 mm; Reference speed:1200 r/min; D1 ≈:208.5 mm; Basic static load rating C0:695 kN; Calculation factor kr:0.2; ra max.:1 mm; D:225 mm; B:45 mm; d1 ≈:200 mm; Mass bearing:4.3 kg; b1:7 mm; Da max.:219 mm; da min.:186 mm; Fatigue load limit Pu:69.5 kN; d:180 mm; das:193 mm; K:4 mm; |
| 3R8-68N3B Rotek Slewing Ring Bearings | Limiting speed:8500 r/min; Ew:60 mm; Basic dynamic load rating C:35.8 kN; Fatigue load limit Pu:12 kN; U:27 mm; Fw:55 mm; Reference speed:7500 r/min; Basic static load rating C0:96.5 kN; Mass needle roller and cage assembly:0.06 kg; |