62.20.0450.000.11.1503 Standard 5 Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:1400 rpm; d:360.000 mm; B:56.00 mm; Grease Speed Rating Open/Shielded n1:1100 rpm; Basic Static Radial Load Rating Co:440000 N; Fillet Radius ra:3.00 mm; Sealed Speed Rating n3:700 rpm; Basic Dynamic Radial Load Rating C:291000 N; Accessories:Two Seals; D:480.0000 mm; |
3R6-71N9 Rotek Slewing Ring Bearings | d3:155 mm; B1:80 mm; Fatigue load limit Pu:2.24 kN; Calculation factor Y0:3.6; D:230 mm; C1:1.322 mm; Reference speed:5600 r/min; da max.:163 mm; Basic static load rating C0:58.5 kN; ra max.:3 mm; Mass bearing + adapter sleeve:11.1 kg; Calculation factor Y1:3.3; Da max.:216 mm; Calculation factor Y2:5.1; Ba min.:15 mm; Permissible angular misalignment α:2.5 °; r1,2 min.:3 mm; B4:23 mm; B:46 mm; |
H7-30E1 Rotek Slewing Ring Bearings | Basic Static Radial Load Rating Co:96500 N; d:40.000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4300 rpm; Fillet Radius rb:1.00 mm; B:54.00 mm; D:110.0000 mm; Oil Speed Rating n2:6200 rpm; Basic Dynamic Radial Load Rating C:121000 N; |
H7-38E1 Rotek Slewing Ring Bearings | ba:72.231 mm; A2:288.925 mm; Pa:60.9 kN; R1:104.775 mm; P150°:78.3 kN; db:149.225 mm; P120°:85.9 kN; P90°:136 kN; Cap bolt:4 x 3/4-10 UNC; End plug (suffix Y):EPR 27; h:61.913 mm; da:130 mm; A1:158.75 mm; Max. speed for Taconite seal:520 r/min; Cap bolt, SAE grade:5; J max.:488.95 mm; H:336.55 mm; Taconite seal (db shaft position):TER 136; Housing:SAF 326; N1:28.575 mm; |
W13-51P1D Rotek Slewing Ring Bearings | S:4.763 mm; PG:1/8 NPT; Cap bolt, SAE grade:8; A1:88.9 mm; L:330.2 mm; R1:53.975 mm; P180°:33.8 kN; RG:3/8 NPT; Housing:FSAFS 517; J max.:279.4 mm; End plug (suffix Y):EPR 9; H:187.325 mm; Initial grease fill:110.56 g; Cap bolt:2 x 5/8-11 UNC; P60°:83.2 kN; Da:150 mm; R2:22.225 mm; ba:35.719 mm; N1:19.05 mm; Stabilizing ring:SR-17-14; |
M5-30P1Z Rotek Slewing Ring Bearings | Basic dynamic load rating C:400 kN; B:55 mm; C1 max.:48 mm; Specific dynamic load factor K:100 N/mm²; d4 ≈:105 mm; l5 ≈:45 mm; l7 min.:90 mm; d2 max.:182 mm; l4 max.:324 mm; d:80 mm; w:90 mm; Basic static load rating C0:655 kN; Mass rod end:15 kg; l3 min.:85 mm; r1 min.:1 mm; α:5 °; dk:105 mm; h1:230 mm; G:M 64x4; Material constant KM:330; |
M5-34P1Z Rotek Slewing Ring Bearings | B4:6 mm; L1:89 mm; Thread grub screw G2:5/16-24 UNF; Basic dynamic load rating C:25.5 kN; T:47.1 mm; A:36.5 mm; Bearing:YAR 207-106-2RF/VE49; H1:60.3 mm; N:13.1 mm; d:34.925 mm; J1:31.8 mm; Basic static load rating C0:15.3 kN; Recommended diameter for attachment bolts, inch G:0.5 in; Hexagonal key size for grub screw N:3.969 mm; J:50.8 mm; Recommended diameter for attachment bolts, mm G:12 mm; Limiting speed with shaft tolerance h6:3200 r/min; |
H7-43N1 Rotek Slewing Ring Bearings | S:0.794 mm; B:80.169 mm; J max.:333.375 mm; Limiting speed:2200 r/min; s:38.497 mm; da:100.013 mm; J min.:304.8 mm; Attachment bolt diameter G:19.05 mm; A:114.3 mm; H1:107.95 mm; H2:61.913 mm; H:217.488 mm; Basic dynamic load rating C:426 kN; L:387.35 mm; J1:57.15 mm; Mass bearing unit:22.5 kg; |
3R16-197E2 Rotek Slewing Ring Bearings | rs (min):5 mm; D:620 mm; B:200 mm; with cylindrical bore:400 min-1; d:440 mm; Static (Cor):22.3 mm; with tapered bore:500 min-1; Grease:8820 kN; Oil:656.000 kN; Dynamic (Cr):12 mm; Pu:4480 kN; |
3R6-49P9 Rotek Slewing Ring Bearings | d:90 mm; d3 max.:118.389 mm; B1:66.954 mm; B:17.729 mm; G:89.586 mm; B4:19.863 mm; d1:77.787 mm; Threads per inch:12; Sleeve:S 18x3.1/16; Hydraulic nut:HMVC 18E; Mass adapter sleeve assembly:1.4 kg; |
No. | Brand | K | B | a | w | T | b | E | H |
R8-30N3 | Rotek | - | 48.00 mm | - | - | - | - | - | - |
M5-38P1 | Rotek | - | 5 mm | - | - | - | - | - | - |
W14-71P1 | Rotek | - | 21.00 mm | - | - | - | - | - | - |
A16-86P1 | Rotek | - | - | - | - | - | - | - | - |
3R6-55E9 | Rotek | - | - | - | - | - | - | - | - |
3R10-98P9 | Rotek | 9 mm | 480.5 mm | - | - | - | 16.7 mm | - | - |
A19-111E1 | Rotek | - | 55 mm | - | - | - | - | - | - |
A14-25P1 | Rotek | - | 5 mm | - | - | - | - | - | - |
3R10-88N2B | Rotek | 0.5 mm | 7 mm | - | - | - | - | - | - |
3R13-122N1B | Rotek | - | - | - | - | - | - | - | - |
162.16.0400.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
M5-34P1Z | Rotek | - | - | - | - | 47.1 mm | - | - | - |
L9-53P9Z | Rotek | - | 27.00 mm | - | - | - | - | - | - |
S24-158E1 | Rotek | - | 180 mm | - | - | - | 16.7 mm | - | - |
R9-67N3 | Rotek | - | 102.394 mm | - | - | - | - | - | 192.088 mm |
3R16-265N3 | Rotek | - | 66.00 mm | - | - | - | - | - | - |
L6-29N9ZD | Rotek | - | 41.00 mm | - | - | - | - | - | - |
R8-52N3 | Rotek | - | 82.00 mm | - | - | - | - | - | - |
R8-39N3 | Rotek | - | - | - | - | - | - | - | 156 mm |
S12-70E1 | Rotek | - | 160 mm | 8 mm | - | - | - | - | - |
A10-35P1A | Rotek | - | 100 mm | - | - | - | 60 mm | - | - |
L6-25N9Z | Rotek | - | 45 mm | - | - | - | - | - | 150 mm |
M4-34P4Z | Rotek | - | - | - | - | - | - | - | 217.488 mm |
A8-39E12 | Rotek | - | 30 mm | - | - | - | - | - | - |
A14-24P1A | Rotek | - | 49.212 mm | 60.556 mm | - | 46.038 mm | - | - | - |
S10-63E1 | Rotek | - | 56.00 mm | - | - | - | - | - | - |
H7-30E1 | Rotek | - | 54.00 mm | - | - | - | - | - | - |
A12-27E3 | Rotek | 4 mm | - | - | - | - | 4.2 mm | - | - |
L6-37P9Z | Rotek | 7.5 mm | 86 mm | - | - | - | 13.9 mm | - | - |
W14-71P1 Rotek Slewing Ring Bearings Video