| 231.21.0475.013 Type 21/520.1 Standard 5 Slewing Ring Bearings | Bearing (basic designation):23244 K; ba min.:112 mm; Pa:650 kN; Cap bolt, rec. tightening torque:400 N·m; ATS:315 mm; Da:400 mm; da:200 mm; H1:240 mm; End cover:ETS 48; A1:260 mm; Appropriate attachment bolt, rec. tightening torque:1310 N·m; Q180°:1430 kN; Q120°:2860 kN; Q150°:1650 kN; bb:107 mm; P120°:1500 kN; J1:150 mm; J:600 mm; J6:650 mm; H:474 mm; |
| A12-27E3 Rotek Slewing Ring Bearings | Basic dynamic load rating C:616 kN; r3,4 min.:0.6 mm; D3:196 mm; Snap ring in accordance with DIN 471:200x4; D:200 mm; d:130 mm; -:0.2 mm; Ca2:75 mm; Mass bearing:10.5 kg; das:150 mm; K:4 mm; Fatigue load limit Pu:120 kN; +:0.2 mm; C2:5.4 mm; C1:83.2 mm; C:94 mm; b:4.2 mm; Limiting speed:630 r/min; Calculation factor kr:0.4; da min.:137 mm; |
| L6-43N9Z Rotek Slewing Ring Bearings | P60°:101 kN; RG:3/8 NPT; P120°:38.3 kN; PosiTrac Plus contact element:2 x B10724-188; Pa:8.1 kN; Housing:FSAF 518; Mass pillow block:21.3 kg; Ca:49.809 mm; R1:60.325 mm; Cap bolt, SAE grade:5; H:192.484 mm; H2:41.275 mm; J max.:295.275 mm; R2:27.781 mm; Max. speed for PosiTrac Plus seal:1800 r/min; Labyrinth ring:2 x LOR 189; Da:160 mm; Appropriate attachment bolt size G:0.625 in; PG:1/8 NPT; |
| 62.20.0414.575.01.1403 Standard 5 Slewing Ring Bearings | B:70 mm; M1:7 mm; Mass locking clip:0.41 kg; Spring washer in accordance with DIN 128:A 24; M2:76 mm; M3:26 mm; M:21 mm; Hexagonal head bolt:M 24x50; |
| 3R6-55E9 Rotek Slewing Ring Bearings | d:13.000 mm; Width - Outer Ring B0:10.0 mm; Basic Radial Load Rating-Dynamic DC:6890 N; Old MRC Bearing Number:201FFS2; Basic Interchange FAF:201KLL3; Width - Overall B:15.4 mm; Basic Interchange BCA:88013; Width - Inner Ring B1:15.40 mm; D:32.0000 mm; Basic Radial Load Rating-Static SCO:3050 N; Fillet Radius ra:0.64 mm; Accessories:88000 Two Seals; Speed Rating-Single and Double Sealed Grease SDG:15000 rpm; |
| A9-54N2 Rotek Slewing Ring Bearings | B5:66 mm; d1:380 mm; G2:M 6; B1:168 mm; B:52 mm; Hydraulic nut:HMV 80E; d3:470 mm; G3:9 mm; Mass adapter sleeve assembly:35.9 kg; d:400 mm; G:Tr 400x5; A:4 mm; |
| L6-43P9ZD Rotek Slewing Ring Bearings | r1,2 min.:1.1 mm; Calculation factor (single, tandem) Y2:0.87; db max.:70.2 mm; da min.:66 mm; a:27.2 mm; Calculation factor fHC:1.02; Calculation factor f2D:1.08; Attainable speed for grease lubrication:15000 r/min; Calculation factor e:0.68; r3,4 min.:0.6 mm; Ball diameter Dw:11.112 mm; Calculation factor f2A:1; Number of balls z:19; Basic dynamic load rating C:39 kN; Preload class B GB:480 N; Static axial stiffness, preload class C:323 N/µm; |
| 230.20.0400.013 Type 21/520. Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:737 kN; r3,4 min.:2.1 mm; K:4 mm; B:80 mm; Fatigue load limit Pu:160 kN; D1 ≈:268.5 mm; d1 ≈:248 mm; Mass bearing:17 kg; Da max.:288 mm; Limiting speed:1200 r/min; Reference speed:950 r/min; s max.:5 mm; D:300 mm; d:220 mm; r1,2 min.:2.1 mm; das:240 mm; da min.:232 mm; b1:8 mm; rb max.:2 mm; ra max.:2 mm; |
| A16-59N2 Rotek Slewing Ring Bearings | Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; D:80 mm; Mass bushing:0.44 kg; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; d:70 mm; B:60 mm; Coefficient of friction µ max.:0.1; |
| L6-33E9Z Rotek Slewing Ring Bearings | Dynamic (Cr):3 mm; Oil:120.650 kN; Pu:657 kN; Grease:1160 kN; D:210 mm; with tapered bore:1 200 min-1; B:80 mm; with cylindrical bore:900 min-1; d:130 mm; Static (Cor):5.5 mm; rs (min):2 mm; |