| 3R10-82E3C Rotek Slewing Ring Bearings | h:60.325 mm; Cap bolt:4 x 3/4-10 UNC; H:377.825 mm; R1:114.3 mm; H2:76.2 mm; J min.:530.225 mm; ba:75.406 mm; End plug (suffix Y):EPR 19; Eye bolt:2 x 3/8-16 UNC; J1:117.475 mm; L:679.45 mm; P60°:234 kN; J max.:600.075 mm; R2:41.275 mm; S:4.763 mm; Pa:46.3 kN; Labyrinth ring:2 x LOR 148; N1:28.575 mm; Initial grease fill:1304.1 g; Mass pillow block:137 kg; |
| 3R6-49N9 Rotek Slewing Ring Bearings | Static axial stiffness, preload class A:46 N/µm; Calculation factor f0:8.2; Calculation factor f1:1; ra max.:1 mm; r3,4 min.:0.6 mm; B:16 mm; Static axial stiffness, preload class C:98 N/µm; db max.:57.3 mm; Preload class A GA:85 N; d1:60.25 mm; da min.:54.6 mm; Static axial stiffness, preload class B:72 N/µm; db min.:54.6 mm; Da max.:75.4 mm; Attainable speed for grease lubrication:30000 r/min; |
| 162.16.0400.891.21.1503 Standard 5 Slewing Ring Bearings | Static axial stiffness, preload class D:214 N/µm; r3,4 min.:0.3 mm; Basic dynamic load rating C:15.9 kN; Reference grease quantity Gref:2.4 cm³; Static axial stiffness, preload class C:162 N/µm; Calculation factor e:0.68; Ball diameter Dw:7.938 mm; Preload class B GB:200 N; Calculation factor f2C:1.05; Calculation factor f2D:1.08; Db max.:66 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; |
| 3R6-55P9 Rotek Slewing Ring Bearings | H:377.825 mm; P180°:89 kN; Labyrinth ring (db shaft position):LOR 165; ba:88.106 mm; Housing:SAW 236; J1:117.475 mm; H2:76.2 mm; Cap bolt:4 x 3/4-10 UNC; Eye bolt:2 x 3/8-16 UNC; PosiTrac Plus contact element (db shaft position):B10724-167; Appropriate attachment bolt size G:1 in; End plug (suffix Y):EPR 21; Mass pillow block:137 kg; PG:1/4 NPT; A1:180.975 mm; P60°:234 kN; da:180 mm; Cap bolt recommended tightening torque:515.2 N·m; |
| 250.14.0300.013 Type 13/4 Standard 5 Slewing Ring Bearings | Calculation factor Y1:0.66; ra max.:1.5 mm; Calculation factor Y2:1.07; Calculation factor A:0.0453; da min.:84 mm; Calculation factor e:0.95; d1 ≈:88.5 mm; Limiting speed:8500 r/min; B:25 mm; D:130 mm; h:6.5 mm; Mass bearing:1.45 kg; d:75 mm; Basic static load rating C0:132 kN; Calculation factor Y0:0.58; b:6.5 mm; Basic dynamic load rating C:125 kN; Calculation factor X:0.6; D1 ≈:112 mm; |
| R8-49E3 Rotek Slewing Ring Bearings | B:34 mm; Hydraulic nut:HMV 36 E; B1:109 mm; d:180 mm; G:M 180x3; Mass adapter sleeve assembly:6.7 kg; d1:160 mm; d3:230 mm; |
| A9-24P2 Rotek Slewing Ring Bearings | b:2.8 mm; Calculation factor f2B:1.02; Static axial stiffness, preload class C:185 N/µm; Fatigue load limit Pu:2.65 kN; C3:3.8 mm; Basic dynamic load rating C:67.6 kN; Da max.:124 mm; r1,2 min.:1.1 mm; Static axial stiffness, preload class A:97 N/µm; Attainable speed for oil-air lubrication:16000 r/min; Static axial stiffness, preload class B:132 N/µm; C1:11.1 mm; Static axial stiffness, preload class D:268 N/µm; |
| 3R8-110N1 Rotek Slewing Ring Bearings | R2:42.069 mm; Initial grease fill:1672.65 g; P90°:249 kN; S:4.763 mm; Ca:101.803 mm; P120°:151 kN; h:61.913 mm; Da:339.999 mm; Labyrinth ring:2 x LOR 154; RG:1 NPT; Pa:52.5 kN; A1:190.5 mm; Housing:SSAFS 538; H2:79.375 mm; Eye bolt:2 x 1/2-13 UNC; A2:276.225 mm; H1:200.025 mm; P60°:416 kN; L:711.2 mm; Cap bolt:1 1/8-7 UNC; |
| A18-80E1 Rotek Slewing Ring Bearings | Specific dynamic load factor K:25 N/mm²; Mass bushing:0.065 kg; Coefficient of friction µ max.:0.15; α:105 °; Tolerance shaft:e7; d:17 mm; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; B:30 mm; h:18 mm; D:25 mm; Tolerance housing:H7; a:3 mm; Specific static load factor K0:45 N/mm²; Coefficient of friction µ min.:0.08; |
| 60.20.0414.575.01.1403 Standard 5 Slewing Ring Bearings | Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; D:130.0000 mm; Basic Static Radial Load Rating Co:95000 N; Oil Speed Rating n2:4500 rpm; B:57.20 mm; Grease Speed Rating n1:3400 rpm; d:60.000 mm; Accessories:Shield & Seal & Snap; Basic Dynamic Radial Load Rating C:121000 N; |