| L9-46P9Z Rotek Slewing Ring Bearings | B1:2 mm; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; D:8 mm; Tolerance shaft:h8; Specific dynamic load factor K:10 N/mm²; D1:12 mm; d:4 mm; Coefficient of friction µ max.:0.1; B:6 mm; Tolerance housing:H7; Mass bushing:0.0014 kg; |
| A19-111E1 Rotek Slewing Ring Bearings | Basic static load rating C0:585 kN; α:5 °; h:270 mm; Mass rod end:12 kg; dk:105 mm; l1 min.:140 mm; l7 min.:98 mm; Material constant KM:330; l2 max.:364 mm; d:80 mm; Basic dynamic load rating C:600 kN; Specific dynamic load factor K:150 N/mm²; B:55 mm; d2 max.:182 mm; G:M 64x4; C1 max.:48 mm; r1 min.:1 mm; |
| L6-37P9Z Rotek Slewing Ring Bearings | Calculation factor Y0:1.8; Calculation factor Y1:1.9; ra max.:2.5 mm; Da max.:246 mm; B4:22 mm; r1,2 min.:3 mm; D:260 mm; d3:155 mm; B:86 mm; b:13.9 mm; Fatigue load limit Pu:100 kN; Basic static load rating C0:1120 kN; Reference speed:2000 r/min; K:7.5 mm; Calculation factor Y2:2.9; D1 ≈:216 mm; Limiting speed:2600 r/min; d2 ≈:152 mm; da max.:152 mm; db min.:131 mm; |
| L9-46E9Z Rotek Slewing Ring Bearings | d:760 mm; r3,4 min.:7.5 mm; B:790 mm; F:846 mm; Mass bearing:2440 kg; Calculation factor kr:760; r1,2 min.:7.5 mm; Basic static load rating C0:65500 kN; b:22.3 mm; Design variant/feature:BC4.10/W33WI; C:790 mm; K:12 mm; Fatigue load limit Pu:4400 kN; Basic dynamic load rating C:23800 kN; D1 ≈:974 mm; D:1080 mm; |
| L6-33P9Z Rotek Slewing Ring Bearings | Fatigue load limit Pu:1180 kN; Basic static load rating C0:13700 kN; D1 ≈:489 mm; F:422 mm; α:20 °; b:11.1 mm; Basic dynamic load rating C:5720 kN; Mass bearing:295 kg; D:540 mm; C:400 mm; r3,4 min.:2 mm; r1,2 min.:10 mm; Design variant/feature:BC4.8/W33WI; B:400 mm; d:380 mm; K:6 mm; |
| H7-43N1 Rotek Slewing Ring Bearings | S:0.794 mm; B:80.169 mm; J max.:333.375 mm; Limiting speed:2200 r/min; s:38.497 mm; da:100.013 mm; J min.:304.8 mm; Attachment bolt diameter G:19.05 mm; A:114.3 mm; H1:107.95 mm; H2:61.913 mm; H:217.488 mm; Basic dynamic load rating C:426 kN; L:387.35 mm; J1:57.15 mm; Mass bearing unit:22.5 kg; |
| A16-53E1A Rotek Slewing Ring Bearings | Db1:76 mm; Recommended lock nut tightening angle α:95 °; Basic dynamic load rating C:19.5 kN; RG:1/4-28 UNF; Db2:85 mm; T:40.5 mm; Housing material:Cast iron; Recommended diameter for attachment bolts, inch G:0.375 in; GN:1/4-28 SAE-LT; A1:13 mm; J:83 mm; R1:19.5 mm; Mass bearing unit:1.05 kg; L:108 mm; N:12 mm; Bearing:YSA 206-2FK; d:25 mm; J6:96 mm; SWN:7 mm; Limiting speed:6300 r/min; |
| W17-108P1 Rotek Slewing Ring Bearings | Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; d:45 mm; Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; Mass bushing:0.098 kg; D:51 mm; B:35 mm; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; |
| A13-38E1 Rotek Slewing Ring Bearings | Housing material:Composite for food a; s1:30.2 mm; Recommended diameter for attachment bolts, mm G:12 mm; A5:33.5 mm; B4:8 mm; Mass bearing unit:0.96 kg; L:176 mm; A:48 mm; Bearing:YAR 208-108-2RF/VE49; H1:49.2 mm; A1:30 mm; J max.:143 mm; H:99 mm; N:21.5 mm; H2:19 mm; N1:14.5 mm; Thread grub screw G2:5/16-24 UNF; d:38.1 mm; J min.:129 mm; Limiting speed:2800 r/min; |
| S8-56E1 Rotek Slewing Ring Bearings | H:144.463 mm; Mass bearing unit:8.39 kg; Basic dynamic load rating C:147 kN; s:31.75 mm; Limiting speed:3100 r/min; S:0.794 mm; H1:69.85 mm; Attachment bolt diameter G:15.875 mm; J1:47.625 mm; da:63.5 mm; H2:41.275 mm; A:88.9 mm; d2:101.6 mm; J min.:209.55 mm; J max.:225.425 mm; B:85.725 mm; L:266.7 mm; A1:99.219 mm; |