| 3R8-110N1 Rotek Slewing Ring Bearings | R2:42.069 mm; Initial grease fill:1672.65 g; P90°:249 kN; S:4.763 mm; Ca:101.803 mm; P120°:151 kN; h:61.913 mm; Da:339.999 mm; Labyrinth ring:2 x LOR 154; RG:1 NPT; Pa:52.5 kN; A1:190.5 mm; Housing:SSAFS 538; H2:79.375 mm; Eye bolt:2 x 1/2-13 UNC; A2:276.225 mm; H1:200.025 mm; P60°:416 kN; L:711.2 mm; Cap bolt:1 1/8-7 UNC; |
| H7-43N1 Rotek Slewing Ring Bearings | S:0.794 mm; B:80.169 mm; J max.:333.375 mm; Limiting speed:2200 r/min; s:38.497 mm; da:100.013 mm; J min.:304.8 mm; Attachment bolt diameter G:19.05 mm; A:114.3 mm; H1:107.95 mm; H2:61.913 mm; H:217.488 mm; Basic dynamic load rating C:426 kN; L:387.35 mm; J1:57.15 mm; Mass bearing unit:22.5 kg; |
| R8-35N3 Rotek Slewing Ring Bearings | D:140.0000 mm; d:65.000 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Shields & Snap-R; Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:163000 N; B:61.90 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:154000 N; Grease Speed Rating n1:3200 rpm; |
| A16-67P2 Rotek Slewing Ring Bearings | PosiTrac Plus contact element (db shaft position):B10724-117; A2:187.325 mm; Appropriate attachment bolt size G:0.75 in; Stabilizing ring:SR-24-20; L:419.1 mm; RG:1/2 NPT; PG:1/4 NPT; Initial grease fill:379.89 g; Labyrinth ring (db shaft position):LOR 118; A1:120.65 mm; da:100 mm; Cap bolt recommended tightening torque:1220 N·m; h:51.594 mm; Labyrinth ring (dc shaft position):LOR 106; Cap bolt:2 x 1-8 UNC; |
| R9-67N3 Rotek Slewing Ring Bearings | L:330.2 mm; d2:130.175 mm; Basic dynamic load rating C:253 kN; J min.:234.95 mm; da:87.313 mm; J max.:282.575 mm; H:192.088 mm; s:36.513 mm; A1:107.156 mm; A:80.963 mm; B:102.394 mm; H2:57.15 mm; S:0.794 mm; Mass bearing unit:14.3 kg; Attachment bolt diameter G:22.225 mm; H1:95.25 mm; Limiting speed:800 r/min; |
| L9-57E9Z Rotek Slewing Ring Bearings | Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Calculation factor (single, tandem) Y0:0.38; Calculation factor f1:0.99; d1:112.38 mm; D1:127.61 mm; Calculation factor f2A:1; Calculation factor f2B:1.03; Db max.:139.4 mm; Da max.:138 mm; Static axial stiffness, preload class B:319 N/µm; Calculation factor (single, tandem) X2:0.41; |
| 161.16.0400.891.21.1503 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:6800 N; Basic Dynamic Radial Load Rating C:11700 N; Grease Speed Rating n1:14000 rpm; d:12.000 mm; Accessories:One Shield; Oil Speed Rating n2:18000 rpm; B:19.1 mm; D:37.0000 mm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:14000 rpm; |
| 3R6-49N9 Rotek Slewing Ring Bearings | Static axial stiffness, preload class A:46 N/µm; Calculation factor f0:8.2; Calculation factor f1:1; ra max.:1 mm; r3,4 min.:0.6 mm; B:16 mm; Static axial stiffness, preload class C:98 N/µm; db max.:57.3 mm; Preload class A GA:85 N; d1:60.25 mm; da min.:54.6 mm; Static axial stiffness, preload class B:72 N/µm; db min.:54.6 mm; Da max.:75.4 mm; Attainable speed for grease lubrication:30000 r/min; |
| A14-25P1 Rotek Slewing Ring Bearings | Reference speed:110000 r/min; r1,2 min.:0.2 mm; Da max.:11.4 mm; Limiting speed:56000 r/min; d:4 mm; d2 ≈:6 mm; Fatigue load limit Pu:0.011 kN; Basic dynamic load rating C:0.741 kN; D2 ≈:11.35 mm; Mass bearing:0.0031 kg; da min.:5.6 mm; Calculation factor kr:0.03; Basic static load rating C0:0.25 kN; da max.:5.9 mm; B:5 mm; Calculation factor f0:6.4; ra max.:0.2 mm; D:13 mm; |
| 62.20.0414.500.01.1503 Standard 5 Slewing Ring Bearings | B:46.00 mm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:1300 rpm; Basic Dynamic Radial Load Rating C:242000 N; d:380.000 mm; Grease Speed Rating Open/Shielded n1:1000 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:365000 N; Sealed Speed Rating n3:0 rpm; D:480.0000 mm; |