| 3R16-102P5 Rotek Slewing Ring Bearings | rb max.:1 mm; r3,4 min.:1.1 mm; D:210 mm; s max.:4.4 mm; Reference speed:3600 r/min; Da max.:201 mm; Axial load factor Y:0.6; D1 ≈:183.2 mm; r1,2 min.:2 mm; Calculation factor kr:0.1; Limiting speed:3600 r/min; Basic dynamic load rating C:172 kN; da min.:147 mm; F:158 mm; Basic static load rating C0:245 kN; ra max.:2 mm; Mass bearing:3.92 kg; Limiting value e:0.2; B:33 mm; d:140 mm; |
| 3R6-49N9 Rotek Slewing Ring Bearings | Static axial stiffness, preload class A:46 N/µm; Calculation factor f0:8.2; Calculation factor f1:1; ra max.:1 mm; r3,4 min.:0.6 mm; B:16 mm; Static axial stiffness, preload class C:98 N/µm; db max.:57.3 mm; Preload class A GA:85 N; d1:60.25 mm; da min.:54.6 mm; Static axial stiffness, preload class B:72 N/µm; db min.:54.6 mm; Da max.:75.4 mm; Attainable speed for grease lubrication:30000 r/min; |
| M5-36P1 Rotek Slewing Ring Bearings | l3 min.:60 mm; l5 ≈:25 mm; B:25 mm; d:35 mm; w:41 mm; d4 ≈:49 mm; h1:130 mm; dk:47 mm; Specific dynamic load factor K:150 N/mm²; l4 max.:174 mm; Material constant KM:330; l7 min.:40 mm; Basic dynamic load rating C:120 kN; r1 min.:0.6 mm; Basic static load rating C0:134 kN; G:M 36x3; C1 max.:22 mm; Mass rod end:1.4 kg; α:6 °; d2 max.:84 mm; |
| A8-39E12 Rotek Slewing Ring Bearings | d:100 mm; B:30 mm; Mass inner ring:0.35 kg; F:110 mm; r, r1,2 min.:1.1 mm; |
| 62.20.0400.001.21.1503 Standard 5 Slewing Ring Bearings | Fillet Radius ra:1.50 mm; Oil Speed Rating n2:7000 rpm; d:40.000 mm; D:90.0000 mm; B:62.00 mm; Basic Dynamic Radial Load Rating C:79300 N; Basic Static Radial Load Rating Co:65500 N; Grease Speed Rating n1:5300 rpm; Fillet Radius rb:1.00 mm; |
| M5-34P1Z Rotek Slewing Ring Bearings | B4:6 mm; L1:89 mm; Thread grub screw G2:5/16-24 UNF; Basic dynamic load rating C:25.5 kN; T:47.1 mm; A:36.5 mm; Bearing:YAR 207-106-2RF/VE49; H1:60.3 mm; N:13.1 mm; d:34.925 mm; J1:31.8 mm; Basic static load rating C0:15.3 kN; Recommended diameter for attachment bolts, inch G:0.5 in; Hexagonal key size for grub screw N:3.969 mm; J:50.8 mm; Recommended diameter for attachment bolts, mm G:12 mm; Limiting speed with shaft tolerance h6:3200 r/min; |
| L9-38E9Z Rotek Slewing Ring Bearings | A1:149.225 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt recommended tightening torque:813.5 N·m; End plug (suffix Y):EPR 18; Initial grease fill:481.95 g; Stabilizing ring:2 x SR-0-24; A2:260.35 mm; Cap bolt:7/8-9 UNC; Max. speed for Taconite seal:520 r/min; L:511.175 mm; J1:85.725 mm; P150°:105 kN; P90°:180 kN; Mass pillow block:87.5 kg; J max.:434.975 mm; Pa:34 kN; Housing:SAFS 034 KA; PG:1/4 NPT; |
| R8-39N3 Rotek Slewing Ring Bearings | J6:106 mm; Recommended diameter for attachment bolts, inch G:0.5 in; RG:1/4-28 UNF; Thread grub screw G2:M6x0.75; A3:3.2 mm; J:130 mm; s1:25.4 mm; Limiting speed:1100 r/min; A5:22 mm; Hexagonal key size for grub screw N:3 mm; Housing material:Cast iron; B4:6 mm; Db1:88 mm; Recommended diameter for attachment bolts, mm G:12 mm; Rα:45 °; A:34.5 mm; L:96 mm; R1:22 mm; N:14 mm; H:156 mm; |
| L6-29E9Z Rotek Slewing Ring Bearings | Da:269.999 mm; J min.:431.8 mm; Housing:SAFS 530; Cap bolt, SAE grade:8; P180°:162 kN; Pa:32.7 kN; S:4.763 mm; Mass pillow block:115 kg; Initial grease fill:623.7 g; H2:63.5 mm; P120°:149 kN; PG:1/4 NPT; Ca:82.804 mm; End plug (suffix Y):EPR 16; da:133.35 mm; Cap bolt recommended tightening torque:813.5 N·m; Cap bolt:7/8-9 UNC; R2:39.688 mm; Labyrinth ring:2 x LOR 126; RG:3/4 NPT; |
| W14-60P1 Rotek Slewing Ring Bearings | Static (Cor):22.3 mm; d:560 mm; with tapered bore:400 min-1; Grease:10690 kN; Oil:730.310 kN; Dynamic (Cr):12 mm; Pu:5110 kN; B:195 mm; D:820 mm; with cylindrical bore:320 min-1; rs (min):6 mm; |