| S20-125E1 Rotek Slewing Ring Bearings | r1,2 min.:0.3 mm; r1 max.:0.8 mm; r2 max.:1 mm; Mass needle roller:2.25 g; Dw:3.5 mm; Lw:29.8 mm; |
| M7-39P1Z Rotek Slewing Ring Bearings | Calculation factor Y1:1.9; D1 ≈:834 mm; T:410 mm; Mass bearing:660 kg; Calculation factor Y0:1.8; Comparative radial load rating CF:2320 kN; Comparative axial load rating CFa:404 kN; Basic static load rating C0:26500 kN; Fatigue load limit Pu:1760 kN; d1 ≈:756 mm; r3,4 min.:6 mm; Calculation factor Y2:2.9; d:710 mm; r1,2 min.:3 mm; D:900 mm; B:410 mm; Design variant/feature:TQO.1/GWI; Basic dynamic load rating C:8800 kN; |
| 3R6-71E9 Rotek Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:6200 rpm; D:90.0000 mm; Basic Static Radial Load Rating Co:36000 N; d:40.000 mm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Basic Dynamic Radial Load Rating C:46800 N; B:23.00 mm; |
| A7-38N1 Rotek Slewing Ring Bearings | da min.:55.1 mm; Da max.:75.9 mm; Specific static load factor K0:300 N/mm²; Da min.:72.4 mm; Mass plain bearing:0.93 kg; Design (sliding contact surface combination):Steel/steel; r1 min.:0.6 mm; b:4.8 mm; b1:5 mm; da max.:57.9 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; M:4 mm; Lubricant:Regular relubricatio; ra max.:0.6 mm; d:50.8 mm; B:44.45 mm; r2 min.:1 mm; |
| M4-34P4Z Rotek Slewing Ring Bearings | Housing:FSAF 520; R2:30.163 mm; L:387.35 mm; Max. speed for PosiTrac Plus seal:1650 r/min; Initial grease fill:365.71 g; End plug (suffix Y):EPR 12; Labyrinth ring:2 x LOR 100; J1:60.325 mm; H2:44.45 mm; J min.:295.275 mm; PosiTrac Plus contact element:2 x B10724-102; Appropriate attachment bolt size G:0.75 in; P150°:40 kN; PG:1/4 NPT; ba:38.894 mm; Pa:10.2 kN; Cap bolt, SAE grade:5; da:84.138 mm; |
| L9-57E9Z Rotek Slewing Ring Bearings | Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Calculation factor (single, tandem) Y0:0.38; Calculation factor f1:0.99; d1:112.38 mm; D1:127.61 mm; Calculation factor f2A:1; Calculation factor f2B:1.03; Db max.:139.4 mm; Da max.:138 mm; Static axial stiffness, preload class B:319 N/µm; Calculation factor (single, tandem) X2:0.41; |
| M7-42P1 Rotek Slewing Ring Bearings | d:9 mm; Mass bushing:0.016 kg; D:14 mm; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ min.:0.08; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; B:12 mm; Specific static load factor K0:45 N/mm²; Coefficient of friction µ max.:0.15; Tolerance shaft:e7; |
| M5-26P1 Rotek Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:143000 N; Grease Speed Rating Open/Shielded n1:3800 rpm; d:70.000 mm; Sealed Speed Rating n3:2600 rpm; B:42.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Static Radial Load Rating Co:104000 N; Accessories:Two Shields; Fillet Radius ra:2.50 mm; D:180.0000 mm; |
| A10-43N28D Rotek Slewing Ring Bearings | Cap bolt recommended tightening torque:61 N·m; J min.:158.75 mm; N1:15.875 mm; End plug (suffix Y):EPR 3; Max. speed for contact seal:4000 r/min; Appropriate attachment bolt size G:0.5 in; S:2.778 mm; A1:60.325 mm; PG:1/8 NPT; Cap bolt:2 x 7/16-14 UNC; H:112.713 mm; ba:24.606 mm; P90°:12.5 kN; H2:20.637 mm; A2:88.9 mm; da:36.513 mm; RG:1/8 NPT; R1:28.575 mm; H1:57.15 mm; Housing:SAF 509; |
| A12-47P2 Rotek Slewing Ring Bearings | Limiting speed:430 r/min; D:680 mm; Mass bearing:39 kg; Db max.:667 mm; Basic static load rating C0:2360 kN; s max.:5 mm; D1 ≈:643 mm; da min.:573 mm; d1 ≈:603 mm; E:655 mm; Da max.:667 mm; d:560 mm; das:597 mm; Basic dynamic load rating C:1020 kN; Fatigue load limit Pu:186 kN; Calculation factor e:0.2; Calculation factor kr:0.1; ra max.:2.5 mm; Reference speed:340 r/min; B:56 mm; |