| L9-57N9Z Rotek Slewing Ring Bearings | B:180 mm; Specific dynamic load factor K:140 N/mm²; D:180 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.08; Coefficient of friction µ min.:0.03; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:1.8 kg; Effective load carrying cross section A:28480 mm²; Specific static load factor K0:200 N/mm²; |
| R11-71E3 Rotek Slewing Ring Bearings | ra max.:1 mm; Calculation factor f2A:1; d2:43.7 mm; Calculation factor f2B:1.02; Fatigue load limit Pu:0.38 kN; Calculation factor f1:0.99; Mass bearing:0.15 kg; a:18.5 mm; Calculation factor fHC:1; Basic dynamic load rating C:14.8 kN; Calculation factor (back-to-back, face-to-face) Y2:1.41; da min.:39.6 mm; db min.:39.6 mm; Calculation factor f2D:1.08; r1,2 min.:1 mm; Number of balls z:16; db max.:43.2 mm; |
| R11-71N3 Rotek Slewing Ring Bearings | d1:117 mm; Mass lock nut:0.76 kg; b:10 mm; B:20 mm; Axial static load carrying capacity:236 kN; Associated spanner:HN 18-20; Grub (set) screw size:M10; h:4 mm; Recommended grub screw tightening torque:35 N·m; d3:125 mm; G:M 95x2; |
| 3R16-197E2 Rotek Slewing Ring Bearings | rs (min):5 mm; D:620 mm; B:200 mm; with cylindrical bore:400 min-1; d:440 mm; Static (Cor):22.3 mm; with tapered bore:500 min-1; Grease:8820 kN; Oil:656.000 kN; Dynamic (Cr):12 mm; Pu:4480 kN; |
| L6-33E9ZD Rotek Slewing Ring Bearings | D:160 mm; Limiting speed:4000 r/min; Mass bearing:3.98 kg; Fatigue load limit Pu:35.5 kN; rb max.:3 mm; a:53.377 mm; r1,2 min.:3 mm; Dimension series:7FC; Da min.:121 mm; Da max.:148 mm; Calculation factor e:0.88; d1 ≈:125.55 mm; Reference speed:3000 r/min; T:45 mm; d:80 mm; Basic static load rating C0:315 kN; da max.:94 mm; B:41 mm; Cb min.:14 mm; ra max.:3 mm; |
| R9-63E3 Rotek Slewing Ring Bearings | d:4.000 mm; Sealed Speed Rating n3:30000 rpm; Basic Static Radial Load Rating Co:600 N; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:50000 rpm; Accessories:Two Seals; D:16.0000 mm; B:5.00 mm; Grease Speed Rating Open/Shielded n1:43000 rpm; Basic Dynamic Radial Load Rating C:1470 N; |
| R8-30N3 Rotek Slewing Ring Bearings | B:48.00 mm; Oil Speed Rating n2:4800 rpm; Basic Dynamic Radial Load Rating C:95600 N; Basic Static Radial Load Rating Co:32500 N; d:65.000 mm; D:140.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4000 rpm; |
| L6-43N9ZD Rotek Slewing Ring Bearings | d:30.000 mm; Sealed Speed Rating n3:7500 rpm; Basic Static Radial Load Rating Co:11200 N; Grease Speed Rating Open/Shielded n1:10000 rpm; Basic Dynamic Radial Load Rating C:19500 N; Oil Speed Rating Open/Shielded n2:13000 rpm; Grease Speed Rating n1:10000 rpm; D:62.0000 mm; B:16.00 mm; Oil Speed Rating n2:13000 rpm; Accessories:One Seal; Fillet Radius ra:1.00 mm; |
| 3R8-122N1A Rotek Slewing Ring Bearings | A:80.963 mm; H2:57.15 mm; B:102.394 mm; H1:95.25 mm; Limiting speed:2600 r/min; Attachment bolt diameter G:22.225 mm; J min.:234.95 mm; A1:107.156 mm; S:0.794 mm; Mass bearing unit:14.3 kg; L:330.2 mm; da:87.313 mm; J max.:282.575 mm; Basic dynamic load rating C:253 kN; s:36.513 mm; d2:130.175 mm; H:192.088 mm; |
| A18-80E1 Rotek Slewing Ring Bearings | Specific dynamic load factor K:25 N/mm²; Mass bushing:0.065 kg; Coefficient of friction µ max.:0.15; α:105 °; Tolerance shaft:e7; d:17 mm; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; B:30 mm; h:18 mm; D:25 mm; Tolerance housing:H7; a:3 mm; Specific static load factor K0:45 N/mm²; Coefficient of friction µ min.:0.08; |