| R8-49E3 Rotek Slewing Ring Bearings | B:34 mm; Hydraulic nut:HMV 36 E; B1:109 mm; d:180 mm; G:M 180x3; Mass adapter sleeve assembly:6.7 kg; d1:160 mm; d3:230 mm; |
| A14-89P1 Rotek Slewing Ring Bearings | P120°:35.6 kN; End plug (suffix Y):EPR 10; Pa:10.5 kN; H1:114.3 mm; H:222.25 mm; J max.:333.375 mm; A1:111.125 mm; Cap bolt recommended tightening torque:515.2 N·m; RG:3/8 NPT; J min.:295.275 mm; R2:30.163 mm; P90°:56.5 kN; Ca:69.799 mm; da:76.2 mm; ba:38.894 mm; P60°:94.3 kN; Cap bolt, SAE grade:8; Stabilizing ring:2 x SR-1617; N1:25.4 mm; A2:231.775 mm; |
| H7-43N3A Rotek Slewing Ring Bearings | d:440 mm; Pu:5600 kN; Static (Cor):22.3 mm; B:226 mm; D:720 mm; with cylindrical bore:430 min-1; Oil:765.770 kN; Grease:10640 kN; Dynamic (Cr):12 mm; with tapered bore:530 min-1; rs (min):6 mm; |
| A13-38E1 Rotek Slewing Ring Bearings | Housing material:Composite for food a; s1:30.2 mm; Recommended diameter for attachment bolts, mm G:12 mm; A5:33.5 mm; B4:8 mm; Mass bearing unit:0.96 kg; L:176 mm; A:48 mm; Bearing:YAR 208-108-2RF/VE49; H1:49.2 mm; A1:30 mm; J max.:143 mm; H:99 mm; N:21.5 mm; H2:19 mm; N1:14.5 mm; Thread grub screw G2:5/16-24 UNF; d:38.1 mm; J min.:129 mm; Limiting speed:2800 r/min; |
| L6-43N9Z Rotek Slewing Ring Bearings | P60°:101 kN; RG:3/8 NPT; P120°:38.3 kN; PosiTrac Plus contact element:2 x B10724-188; Pa:8.1 kN; Housing:FSAF 518; Mass pillow block:21.3 kg; Ca:49.809 mm; R1:60.325 mm; Cap bolt, SAE grade:5; H:192.484 mm; H2:41.275 mm; J max.:295.275 mm; R2:27.781 mm; Max. speed for PosiTrac Plus seal:1800 r/min; Labyrinth ring:2 x LOR 189; Da:160 mm; Appropriate attachment bolt size G:0.625 in; PG:1/8 NPT; |
| L9-46E9Z Rotek Slewing Ring Bearings | d:760 mm; r3,4 min.:7.5 mm; B:790 mm; F:846 mm; Mass bearing:2440 kg; Calculation factor kr:760; r1,2 min.:7.5 mm; Basic static load rating C0:65500 kN; b:22.3 mm; Design variant/feature:BC4.10/W33WI; C:790 mm; K:12 mm; Fatigue load limit Pu:4400 kN; Basic dynamic load rating C:23800 kN; D1 ≈:974 mm; D:1080 mm; |
| W13-38P1 Rotek Slewing Ring Bearings | d3:45 mm; G:M 30x1.5; d:30 mm; B:7 mm; d1:25.4 mm; B1:38 mm; Mass adapter sleeve assembly:0.11 kg; B4:8 mm; |
| 3R8-59N2C Rotek Slewing Ring Bearings | P120°:66.7 kN; P90°:107 kN; H:244.475 mm; Stabilizing ring:2 x 38151-26; J max.:368.3 mm; ba:51.594 mm; Cap bolt recommended tightening torque:298.3 N·m; L:419.1 mm; Initial grease fill:232.47 g; RG:3/8 NPT; N1:24.209 mm; H2:52.388 mm; R1:73.025 mm; Cap bolt, SAE grade:8; PG:1/4 NPT; A2:231.775 mm; Mass pillow block:50.8 kg; Cap bolt:5/8-11 UNC; Pa:20.2 kN; Ca:62.789 mm; |
| A12-32P2 Rotek Slewing Ring Bearings | Mass inner ring:0.04 kg; d:30 mm; r, r1,2 min.:0.3 mm; F:35 mm; B:20.5 mm; |
| A18-60P1B Rotek Slewing Ring Bearings | D:61.913 mm; α:8 °; r1 min.:1 mm; Material constant KM:330; d:31.75 mm; Specific dynamic load factor K:150 N/mm²; Mass plain bearing:0.54 kg; da max.:41.8 mm; Da max.:58 mm; Basic static load rating C0:375 kN; Da min.:52.3 mm; dk:54.737 mm; ra max.:1 mm; rb max.:1 mm; B:35.306 mm; Sealing solution:Triple-lip seals; Basic dynamic load rating C:186 kN; Specific static load factor K0:300 N/mm²; |