| 3R8-59N2C Rotek Slewing Ring Bearings | P120°:66.7 kN; P90°:107 kN; H:244.475 mm; Stabilizing ring:2 x 38151-26; J max.:368.3 mm; ba:51.594 mm; Cap bolt recommended tightening torque:298.3 N·m; L:419.1 mm; Initial grease fill:232.47 g; RG:3/8 NPT; N1:24.209 mm; H2:52.388 mm; R1:73.025 mm; Cap bolt, SAE grade:8; PG:1/4 NPT; A2:231.775 mm; Mass pillow block:50.8 kg; Cap bolt:5/8-11 UNC; Pa:20.2 kN; Ca:62.789 mm; |
| L9-49N9Z Rotek Slewing Ring Bearings | bb:98 mm; P150°:1400 kN; Ca:148 mm; P55°:4200 kN; J6:650 mm; Q180°:1430 kN; H1:240 mm; da:260 mm; J:600 mm; db:280 mm; Q120°:2860 kN; s:12 mm; d2:418 mm; Eye bolt, size:2 x M 24; Da:400 mm; A1:260 mm; N:42 mm; Initial grease fill, 40%:3.9 kg; |
| M4-38P4Z Rotek Slewing Ring Bearings | B4:32.537 mm; d:190 mm; B1:133.375 mm; B:28.829 mm; Sleeve:S 38x6.7/8; d1:174.625 mm; Hydraulic nut:HMVC 38E; d3 max.:240.64 mm; Mass adapter sleeve assembly:10.5 kg; Threads per inch:8; G:189.789 mm; |
| A18-74E3 Rotek Slewing Ring Bearings | Accessories:One Shield; Oil Speed Rating Open/Shielded n2:16000 rpm; Fillet Radius ra:0.79 mm; Grease Speed Rating Open/Shielded n1:13000 rpm; Sealed Speed Rating n3:9000 rpm; Width Plain B:9.5 mm; d:25.400 mm; Basic Dynamic Radial Load Rating C:10100 N; D:50.8000 mm; Shielded or Sealed B1:12.7 mm; Basic Static Radial Load Rating Co:6000 N; |
| H7-38E1 Rotek Slewing Ring Bearings | ba:72.231 mm; A2:288.925 mm; Pa:60.9 kN; R1:104.775 mm; P150°:78.3 kN; db:149.225 mm; P120°:85.9 kN; P90°:136 kN; Cap bolt:4 x 3/4-10 UNC; End plug (suffix Y):EPR 27; h:61.913 mm; da:130 mm; A1:158.75 mm; Max. speed for Taconite seal:520 r/min; Cap bolt, SAE grade:5; J max.:488.95 mm; H:336.55 mm; Taconite seal (db shaft position):TER 136; Housing:SAF 326; N1:28.575 mm; |
| W13-49P1 Rotek Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:216000 N; Accessories:One Shield & Snap-Ri; Fillet Radius ra:2.00 mm; D:310.0000 mm; Grease Speed Rating Open/Shielded n1:1900 rpm; Oil Speed Rating Open/Shielded n2:2400 rpm; d:200.000 mm; Basic Static Radial Load Rating Co:245000 N; B:51.00 mm; Sealed Speed Rating n3:1300 rpm; |
| R8-44N3 Rotek Slewing Ring Bearings | Spring washer in accordance with DIN 128:A 16; M1:5 mm; M:15 mm; B:36 mm; Hexagonal head bolt:M 16x30; M2:53 mm; Mass locking clip:0.11 kg; M3:18 mm; |
| 3R8-98E9 Rotek Slewing Ring Bearings | Calculation factor kr:0.25; Basic dynamic load rating C:2380 kN; Reference speed:500 r/min; d:380 mm; da min.:398 mm; K:5 mm; D1 ≈:469 mm; d1 ≈:430 mm; r1,2 min.:4 mm; Fatigue load limit Pu:500 kN; Limiting speed:630 r/min; D:520 mm; b1:9.4 mm; Da max.:502 mm; Basic static load rating C0:5700 kN; das:414 mm; B:140 mm; ra max.:3 mm; Mass bearing:92.4 kg; |
| M5-31P1Z Rotek Slewing Ring Bearings | Cap bolt, SAE grade:8; Pa:9.43 kN; L:361.95 mm; A2:233.363 mm; Mass pillow block:29.8 kg; Appropriate attachment bolt size G:0.625 in; A1:98.425 mm; P150°:30.7 kN; P60°:93 kN; Taconite seal:TER 44; R1:63.5 mm; Stabilizing ring:2 x SR-1616; Initial grease fill:365.71 g; N1:19.05 mm; ba:36.513 mm; End plug (suffix Y):EPR 10; Cap bolt:2 x 3/4-10 UNC; Max. speed for Taconite seal:1150 r/min; da:68.263 mm; |
| M4-26P4 Rotek Slewing Ring Bearings | Design (sliding contact surface combination):Steel/steel; dk:29 mm; d:20 mm; da min.:23 mm; Basic dynamic load rating C:30 kN; rb max.:0.3 mm; M:2 mm; d1 ≈:24 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; Lubricant:Regular relubricatio; b:3.1 mm; Basic static load rating C0:146 kN; r1 min.:0.3 mm; B:24 mm; Da max.:33.2 mm; α:6 °; Specific static load factor K0:500 N/mm²; |