| M5-30P1Z Rotek Slewing Ring Bearings | Basic dynamic load rating C:400 kN; B:55 mm; C1 max.:48 mm; Specific dynamic load factor K:100 N/mm²; d4 ≈:105 mm; l5 ≈:45 mm; l7 min.:90 mm; d2 max.:182 mm; l4 max.:324 mm; d:80 mm; w:90 mm; Basic static load rating C0:655 kN; Mass rod end:15 kg; l3 min.:85 mm; r1 min.:1 mm; α:5 °; dk:105 mm; h1:230 mm; G:M 64x4; Material constant KM:330; |
| 3R8-68N3B Rotek Slewing Ring Bearings | Limiting speed:8500 r/min; Ew:60 mm; Basic dynamic load rating C:35.8 kN; Fatigue load limit Pu:12 kN; U:27 mm; Fw:55 mm; Reference speed:7500 r/min; Basic static load rating C0:96.5 kN; Mass needle roller and cage assembly:0.06 kg; |
| R8-46E3 Rotek Slewing Ring Bearings | Fillet Radius ra:2.00 mm; Speed Rating-Open and Shielded-Oil OSO:12000 rpm; Type:200-RDM Series (from; D:170.0000 mm; B:32.00 mm; Basic Radial Load Rating-Dynamic DC:138000 N; Fillet Radius rb:1.00 mm; Speed Rating-Open and Shielded-Grease OSG:8300 rpm; d:95.000 mm; Basic Radial Load Rating-Static SCO:125000 N; |
| H7-43N1 Rotek Slewing Ring Bearings | S:0.794 mm; B:80.169 mm; J max.:333.375 mm; Limiting speed:2200 r/min; s:38.497 mm; da:100.013 mm; J min.:304.8 mm; Attachment bolt diameter G:19.05 mm; A:114.3 mm; H1:107.95 mm; H2:61.913 mm; H:217.488 mm; Basic dynamic load rating C:426 kN; L:387.35 mm; J1:57.15 mm; Mass bearing unit:22.5 kg; |
| A18-89E1 Rotek Slewing Ring Bearings | da:165.1 mm; J min.:441.325 mm; H1:169.875 mm; End plug (suffix Y):EPR 19; Mass pillow block:94.8 kg; Ca:102.794 mm; R1:104.775 mm; Housing:SAF 036 KA; Labyrinth ring:2 x LOR 146; Appropriate attachment bolt size G:1 in; Eye bolt:2 x 3/8-16 UNC; Max. speed for PosiTrac Plus seal:875 r/min; ba:68.263 mm; A2:222.25 mm; PosiTrac Plus contact element:2 x B10724-148; H:336.55 mm; J max.:488.95 mm; PG:1/4 NPT; |
| H8-58E2 Rotek Slewing Ring Bearings | H2:19 mm; Thread grub screw G2:M10x1; J min.:129 mm; J:136 mm; A5:23.5 mm; H:99.5 mm; Basic dynamic load rating C:30.7 kN; Hexagonal key size for grub screw N:5 mm; B1:56.3 mm; L:176 mm; Limiting speed:950 r/min; N1:14.5 mm; Housing material:Composite; d:40 mm; Mass bearing unit:0.97 kg; Fatigue load limit Pu:0.8 kN; A:48 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Basic static load rating C0:19 kN; |
| M4-22P4 Rotek Slewing Ring Bearings | Grease Speed Rating n1:10000 rpm; d:75.000 mm; Basic Static Radial Load Rating Co:85000 N; Basic Dynamic Radial Load Rating C:70200 N; Oil Speed Rating n2:15000 rpm; Fillet Radius ra:1.00 mm; B:40.00 mm; Fillet Radius rb:0.60 mm; D:115.0000 mm; |
| A7-38N1 Rotek Slewing Ring Bearings | da min.:55.1 mm; Da max.:75.9 mm; Specific static load factor K0:300 N/mm²; Da min.:72.4 mm; Mass plain bearing:0.93 kg; Design (sliding contact surface combination):Steel/steel; r1 min.:0.6 mm; b:4.8 mm; b1:5 mm; da max.:57.9 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; M:4 mm; Lubricant:Regular relubricatio; ra max.:0.6 mm; d:50.8 mm; B:44.45 mm; r2 min.:1 mm; |
| 3R13-62N1E Rotek Slewing Ring Bearings | Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:2200 rpm; Oil Speed Rating Open/Shielded n2:2700 rpm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:250000 N; D:240.0000 mm; d:110.000 mm; Basic Dynamic Radial Load Rating C:216000 N; B:50.00 mm; |
| 3R6-55P9 Rotek Slewing Ring Bearings | H:377.825 mm; P180°:89 kN; Labyrinth ring (db shaft position):LOR 165; ba:88.106 mm; Housing:SAW 236; J1:117.475 mm; H2:76.2 mm; Cap bolt:4 x 3/4-10 UNC; Eye bolt:2 x 3/8-16 UNC; PosiTrac Plus contact element (db shaft position):B10724-167; Appropriate attachment bolt size G:1 in; End plug (suffix Y):EPR 21; Mass pillow block:137 kg; PG:1/4 NPT; A1:180.975 mm; P60°:234 kN; da:180 mm; Cap bolt recommended tightening torque:515.2 N·m; |