| L9-57P9Z Rotek Slewing Ring Bearings | N max.:55 mm; h1:65 mm; l7 min.:26 mm; B:25 mm; G:M 20x1.5; r1 min.:0.6 mm; d2 max.:62 mm; Material constant KM:330; l3 min.:29 mm; N1 max.:20 mm; C1 max.:22 mm; Specific dynamic load factor K:100 N/mm²; Mass rod end:0.66 kg; d4 max.:31 mm; Basic dynamic load rating C:48 kN; Tightening torque bolt with internal hexagon:23 N·m; Basic static load rating C0:69.5 kN; l4 max.:97 mm; α:4 °; |
| S14-90E1 Rotek Slewing Ring Bearings | P150°:136 kN; Mass pillow block:223 kg; Max. speed for PosiTrac Plus seal:825 r/min; RG:1 NPT; P120°:151 kN; S:4.763 mm; A2:276.225 mm; Labyrinth ring:2 x LOR 154; P180°:160 kN; ba:78.581 mm; End plug (suffix Y):EPR 21; H1:200.025 mm; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:1735.4 N·m; Ca:101.803 mm; R1:120.65 mm; Housing:SSAFS 538; H:398.462 mm; Cap bolt:1 1/8-7 UNC; |
| 3R8-122N1A Rotek Slewing Ring Bearings | A:80.963 mm; H2:57.15 mm; B:102.394 mm; H1:95.25 mm; Limiting speed:2600 r/min; Attachment bolt diameter G:22.225 mm; J min.:234.95 mm; A1:107.156 mm; S:0.794 mm; Mass bearing unit:14.3 kg; L:330.2 mm; da:87.313 mm; J max.:282.575 mm; Basic dynamic load rating C:253 kN; s:36.513 mm; d2:130.175 mm; H:192.088 mm; |
| L6-29E9Z Rotek Slewing Ring Bearings | Da:269.999 mm; J min.:431.8 mm; Housing:SAFS 530; Cap bolt, SAE grade:8; P180°:162 kN; Pa:32.7 kN; S:4.763 mm; Mass pillow block:115 kg; Initial grease fill:623.7 g; H2:63.5 mm; P120°:149 kN; PG:1/4 NPT; Ca:82.804 mm; End plug (suffix Y):EPR 16; da:133.35 mm; Cap bolt recommended tightening torque:813.5 N·m; Cap bolt:7/8-9 UNC; R2:39.688 mm; Labyrinth ring:2 x LOR 126; RG:3/4 NPT; |
| 3R6-49E9 Rotek Slewing Ring Bearings | d:55 mm; Coefficient of friction µ max.:0.1; D:65 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; B:70 mm; Tolerance shaft:h8; Mass bushing:0.41 kg; |
| A20-95N4 Rotek Slewing Ring Bearings | Accessories:Two Shields; Basic Static Radial Load Rating Co:25000 N; d:60.000 mm; Grease Speed Rating Open/Shielded n1:6700 rpm; Sealed Speed Rating n3:4300 rpm; Fillet Radius ra:1.00 mm; B:18.00 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; Basic Dynamic Radial Load Rating C:32500 N; D:95.0000 mm; |
| R8-35E3 Rotek Slewing Ring Bearings | Fatigue load limit Pu:49 kN; r1,2 min.:3 mm; Reference speed:560 r/min; Minimum load factor A:60; da min.:663 mm; Mass bearing (including seat washer where applicable):48 kg; Da max.:647 mm; D:710 mm; ra max.:2.5 mm; Limiting speed:800 r/min; Basic dynamic load rating C:475 kN; D1 ≈:604 mm; Basic static load rating C0:3400 kN; d:600 mm; H:67 mm; d1 ≈:706 mm; |
| L9-46E9Z Rotek Slewing Ring Bearings | d:760 mm; r3,4 min.:7.5 mm; B:790 mm; F:846 mm; Mass bearing:2440 kg; Calculation factor kr:760; r1,2 min.:7.5 mm; Basic static load rating C0:65500 kN; b:22.3 mm; Design variant/feature:BC4.10/W33WI; C:790 mm; K:12 mm; Fatigue load limit Pu:4400 kN; Basic dynamic load rating C:23800 kN; D1 ≈:974 mm; D:1080 mm; |
| A22-166N1 Rotek Slewing Ring Bearings | Housing:SSAFS 544; R2:46.831 mm; da:200.025 mm; Pa:71.2 kN; h:79.375 mm; Taconite seal:TER 166; P90°:414 kN; Da:399.999 mm; L:831.85 mm; P120°:260 kN; H:473.075 mm; Cap bolt, SAE grade:8; S:4.763 mm; H1:241.3 mm; P60°:691 kN; Ca:117.805 mm; R1:130.175 mm; Cap bolt recommended tightening torque:4284.4 N·m; A1:222.25 mm; RG:1 NPT; |
| M5-31P1 Rotek Slewing Ring Bearings | Grease Speed Rating n1:2800 rpm; Grease Speed Rating Open/Shielded n1:2800 rpm; Sealed Speed Rating n3:1900 rpm; D:215.0000 mm; d:120.000 mm; Accessories:One Seal; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; B:40.00 mm; Basic Static Radial Load Rating Co:118000 N; Oil Speed Rating n2:3400 rpm; Basic Dynamic Radial Load Rating C:146000 N; |