| S16-100E1 Rotek Slewing Ring Bearings | Basic Static Radial Load Rating Co:8000 N; d:60.000 mm; Accessories:One Seal; B:10.00 mm; Fillet Radius ra:0.30 mm; Sealed Speed Rating n3:4800 rpm; Basic Dynamic Radial Load Rating C:8710 N; Oil Speed Rating Open/Shielded n2:9000 rpm; D:78.0000 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; |
| R9-55N3 Rotek Slewing Ring Bearings | Tolerance shaft:h8; Mass bushing:0.009 kg; Specific static load factor K0:20 N/mm²; d:16 mm; D:20 mm; Coefficient of friction µ max.:0.1; Tolerance housing:H7; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; B:12 mm; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ min.:0.05; |
| W13-51P1D Rotek Slewing Ring Bearings | S:4.763 mm; PG:1/8 NPT; Cap bolt, SAE grade:8; A1:88.9 mm; L:330.2 mm; R1:53.975 mm; P180°:33.8 kN; RG:3/8 NPT; Housing:FSAFS 517; J max.:279.4 mm; End plug (suffix Y):EPR 9; H:187.325 mm; Initial grease fill:110.56 g; Cap bolt:2 x 5/8-11 UNC; P60°:83.2 kN; Da:150 mm; R2:22.225 mm; ba:35.719 mm; N1:19.05 mm; Stabilizing ring:SR-17-14; |
| W13-35P1 Rotek Slewing Ring Bearings | Basic static load rating C0:440 kN; d1:105 mm; K:3 mm; ra max.:2 mm; B:45 mm; Reference speed:3400 r/min; Calculation factor Y2:4.4; Calculation factor Y0:2.8; D1 ≈:151 mm; G:M 120x2; D:170 mm; B1:63 mm; B2 ≈:67 mm; Mass bearing + sleeve:4.45 kg; G1:12 mm; Basic dynamic load rating C:326 kN; d2 ≈:125 mm; b:6 mm; Limiting speed:4300 r/min; Calculation factor Y1:2.9; |
| M4-26P4 Rotek Slewing Ring Bearings | Design (sliding contact surface combination):Steel/steel; dk:29 mm; d:20 mm; da min.:23 mm; Basic dynamic load rating C:30 kN; rb max.:0.3 mm; M:2 mm; d1 ≈:24 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; Lubricant:Regular relubricatio; b:3.1 mm; Basic static load rating C0:146 kN; r1 min.:0.3 mm; B:24 mm; Da max.:33.2 mm; α:6 °; Specific static load factor K0:500 N/mm²; |
| M4-38P4 Rotek Slewing Ring Bearings | Weight:0.626 kg; D:130 mm; da:89 min; d:85 mm; Oil:5 600 min-1; rs:0.6 mm; Pu:1.442 kN; ra:0.6 max; Da:126 max; B:14 mm; Bearing designation:16017 ; Static (Cor):32.900 kN; Dynamic (Cr):34.100 kN; Grease:4 700 min-1; |
| L9-42E9Z Rotek Slewing Ring Bearings | H2:63.5 mm; B:80.169 mm; H1:104.775 mm; s:38.497 mm; Basic dynamic load rating C:426 kN; Limiting speed:2200 r/min; S:0.794 mm; H:213.519 mm; Attachment bolt diameter G:25.4 mm; J min.:254 mm; A:89.694 mm; da:101.6 mm; J max.:311.15 mm; L:361.95 mm; Mass bearing unit:19.7 kg; |
| R8-42E3 Rotek Slewing Ring Bearings | Appropriate attachment bolt size G:1 in; P150°:85.9 kN; H2:60.325 mm; Stabilizing ring:SR-28-0; P90°:149 kN; R1:87.313 mm; PG:1/4 NPT; h:51.594 mm; H1:152.4 mm; Cap bolt, SAE grade:5; RG:3/4 NPT; Initial grease fill:481.95 g; L:511.175 mm; End plug (suffix Y):EPR 27; P120°:94.3 kN; Da:250 mm; da:122.237 mm; P60°:249 kN; ba:61.119 mm; J max.:441.325 mm; |
| L9-53N9Z Rotek Slewing Ring Bearings | Tolerance shaft:e7; a:5 mm; Permissible sliding velocity v max.:0.5 m/s; h:76.5 mm; Tolerance housing:H7; Specific static load factor K0:45 N/mm²; α:124 °; Mass bushing:1.7 kg; B:100 mm; D:90 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.15; Specific dynamic load factor K:25 N/mm²; d:75 mm; |
| A16-59N2 Rotek Slewing Ring Bearings | Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; D:80 mm; Mass bushing:0.44 kg; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; d:70 mm; B:60 mm; Coefficient of friction µ max.:0.1; |