| 3R8-59N2C Rotek Slewing Ring Bearings | P120°:66.7 kN; P90°:107 kN; H:244.475 mm; Stabilizing ring:2 x 38151-26; J max.:368.3 mm; ba:51.594 mm; Cap bolt recommended tightening torque:298.3 N·m; L:419.1 mm; Initial grease fill:232.47 g; RG:3/8 NPT; N1:24.209 mm; H2:52.388 mm; R1:73.025 mm; Cap bolt, SAE grade:8; PG:1/4 NPT; A2:231.775 mm; Mass pillow block:50.8 kg; Cap bolt:5/8-11 UNC; Pa:20.2 kN; Ca:62.789 mm; |
| M4-30P4 Rotek Slewing Ring Bearings | Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:25 N/mm²; Mass bushing:0.024 kg; Coefficient of friction µ max.:0.15; α:105 °; Coefficient of friction µ min.:0.08; Specific static load factor K0:45 N/mm²; B:16 mm; h:17 mm; a:3 mm; d:16 mm; Permissible sliding velocity v max.:0.5 m/s; D:22 mm; Tolerance housing:H7; Tolerance shaft:e7; |
| A14-47N5A Rotek Slewing Ring Bearings | d:70.000 mm; Basic Dynamic Radial Load Rating C:68900 N; Basic Static Radial Load Rating Co:56000 N; Grease Speed Rating n1:4300 rpm; B:24.00 mm; D:125.0000 mm; Oil Speed Rating n2:5600 rpm; Fillet Radius ra:1.50 mm; |
| A16-152E2 Rotek Slewing Ring Bearings | Basic Dynamic Radial Load Rating:3150 lbf; Height H:2.9375 in; Weight W:0.72 lb; Dimension L:3.2500 in; Basic Static Radial Load Rating Co:1750 lbf; Dimension F:0.5000 in; Width A:1.4375 in; Dimension H1:1.4375 in; Dimension S1:0.7813 in; Insert Bearing IB:ZMaRC; Distance J:2.0000 in; Thread Diameter G:3/8-16; Shaft Diameter D:15/16 in; |
| A14-25P1 Rotek Slewing Ring Bearings | Reference speed:110000 r/min; r1,2 min.:0.2 mm; Da max.:11.4 mm; Limiting speed:56000 r/min; d:4 mm; d2 ≈:6 mm; Fatigue load limit Pu:0.011 kN; Basic dynamic load rating C:0.741 kN; D2 ≈:11.35 mm; Mass bearing:0.0031 kg; da min.:5.6 mm; Calculation factor kr:0.03; Basic static load rating C0:0.25 kN; da max.:5.9 mm; B:5 mm; Calculation factor f0:6.4; ra max.:0.2 mm; D:13 mm; |
| 3R13-122N1B Rotek Slewing Ring Bearings | A2:304.8 mm; P120°:160 kN; L:831.85 mm; Pa:71.2 kN; Initial grease fill:2749.95 g; H1:241.3 mm; P60°:423 kN; da:200.025 mm; Eye bolt:2 x 1/2-13 UNC; P90°:254 kN; Appropriate attachment bolt size G:1.5 in; Stabilizing ring:SR-44-38; R1:130.175 mm; End plug (suffix Y):EPR 23; A1:222.25 mm; Cap bolt recommended tightening torque:400 N·m; Ca:117.805 mm; Max. speed for PosiTrac Plus seal:725 r/min; |
| A9-24P2 Rotek Slewing Ring Bearings | b:2.8 mm; Calculation factor f2B:1.02; Static axial stiffness, preload class C:185 N/µm; Fatigue load limit Pu:2.65 kN; C3:3.8 mm; Basic dynamic load rating C:67.6 kN; Da max.:124 mm; r1,2 min.:1.1 mm; Static axial stiffness, preload class A:97 N/µm; Attainable speed for oil-air lubrication:16000 r/min; Static axial stiffness, preload class B:132 N/µm; C1:11.1 mm; Static axial stiffness, preload class D:268 N/µm; |
| 3R6-49N9 Rotek Slewing Ring Bearings | Static axial stiffness, preload class A:46 N/µm; Calculation factor f0:8.2; Calculation factor f1:1; ra max.:1 mm; r3,4 min.:0.6 mm; B:16 mm; Static axial stiffness, preload class C:98 N/µm; db max.:57.3 mm; Preload class A GA:85 N; d1:60.25 mm; da min.:54.6 mm; Static axial stiffness, preload class B:72 N/µm; db min.:54.6 mm; Da max.:75.4 mm; Attainable speed for grease lubrication:30000 r/min; |
| A16-79P1A Rotek Slewing Ring Bearings | Accessories:Removable Metal Shie; d:100.000 mm; Oil Speed Rating Open/Shielded n2:3600 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Basic Dynamic Radial Load Rating C:182000 N; B:82.55 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:150000 N; D:215.0000 mm; Sealed Speed Rating n3:2100 rpm; |
| 3R16-265N3 Rotek Slewing Ring Bearings | D:210.0000 mm; Fillet Radius ra:2.00 mm; d:140.000 mm; Oil Speed Rating n2:8000 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:221000 N; B:66.00 mm; Basic Static Radial Load Rating Co:305000 N; Grease Speed Rating n1:5500 rpm; |