| 3R8-98N1 Rotek Slewing Ring Bearings | Attachment bolt diameter G:15.875 mm; Limiting speed:3100 r/min; Basic dynamic load rating C:147 kN; H2:41.275 mm; da:61.913 mm; Mass bearing unit:8.62 kg; J1:47.625 mm; J min.:209.55 mm; s:31.75 mm; H:144.463 mm; B:85.725 mm; H1:69.85 mm; S:0.794 mm; A:88.9 mm; d2:101.6 mm; L:266.7 mm; J max.:225.425 mm; A1:99.219 mm; |
| R8-44N3 Rotek Slewing Ring Bearings | Spring washer in accordance with DIN 128:A 16; M1:5 mm; M:15 mm; B:36 mm; Hexagonal head bolt:M 16x30; M2:53 mm; Mass locking clip:0.11 kg; M3:18 mm; |
| A22-105E2A Rotek Slewing Ring Bearings | d1:746 mm; Mass bearing:62 kg; d:630 mm; Fatigue load limit Pu:695 kN; D:750 mm; r1,2 min.:3 mm; Basic static load rating C0:11200 kN; H:73 mm; B:21.5 mm; Reference speed:240 r/min; Da max.:660 mm; Basic dynamic load rating C:1630 kN; Minimum axial load factor A:10; da min.:720 mm; Limiting speed:480 r/min; ra max.:2.5 mm; D1:634 mm; |
| L9-49P9Z Rotek Slewing Ring Bearings | s:22 mm; ATS:360 mm; P180°:2400 kN; Labyrinth seal:2 x TS 60/10.7/16; N1:42 mm; J1:190 mm; P120°:2200 kN; H:591 mm; Ca:196 mm; N:50 mm; P150°:1900 kN; ba max.:170 mm; Q120°:2860 kN; Q150°:1650 kN; bc:175.5 mm; P55°:6000 kN; End cover:ETS 60; Initial grease fill, 20%:3.9 kg; Eye bolt, size:2 x M 30; bb:129 mm; |
| A19-111E1 Rotek Slewing Ring Bearings | Basic static load rating C0:585 kN; α:5 °; h:270 mm; Mass rod end:12 kg; dk:105 mm; l1 min.:140 mm; l7 min.:98 mm; Material constant KM:330; l2 max.:364 mm; d:80 mm; Basic dynamic load rating C:600 kN; Specific dynamic load factor K:150 N/mm²; B:55 mm; d2 max.:182 mm; G:M 64x4; C1 max.:48 mm; r1 min.:1 mm; |
| A14-31P3 Rotek Slewing Ring Bearings | Calculation factor f2A:1; Preload class B GB:250 N; Static axial stiffness, preload class A:46 N/µm; Calculation factor f0:8.2; Ball diameter Dw:7.938 mm; d2:57.9 mm; Basic static load rating C0:10.6 kN; ra max.:1 mm; B:16 mm; Number of balls z:21; r1,2 min.:1 mm; db min.:54.6 mm; rb max.:0.6 mm; Db max.:75.8 mm; Static axial stiffness, preload class B:72 N/µm; Calculation factor f2C:1.05; |
| A10-35N1L Rotek Slewing Ring Bearings | d:90.000 mm; Basic Dynamic Radial Load Rating C:198000 N; D:225.0000 mm; Grease Speed Rating Open/Shielded n1:2500 rpm; B:54.00 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Fillet Radius ra:3.00 mm; Accessories:Snap-Ring; Basic Static Radial Load Rating Co:212000 N; |
| L9-38E9Z Rotek Slewing Ring Bearings | A1:149.225 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt recommended tightening torque:813.5 N·m; End plug (suffix Y):EPR 18; Initial grease fill:481.95 g; Stabilizing ring:2 x SR-0-24; A2:260.35 mm; Cap bolt:7/8-9 UNC; Max. speed for Taconite seal:520 r/min; L:511.175 mm; J1:85.725 mm; P150°:105 kN; P90°:180 kN; Mass pillow block:87.5 kg; J max.:434.975 mm; Pa:34 kN; Housing:SAFS 034 KA; PG:1/4 NPT; |
| R9-67E3 Rotek Slewing Ring Bearings | Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:46.308; Product Group:M06288; Number of Mounting Holes:6; Mounting Method:Eccentric Collar; Housing Style:6 Bolt Round Flange Cartridge; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:7/8 Inch; Relubricatable:Yes; Insert Part Number:22226; Seals:Triple Lip Viton; |
| R8-39N3 Rotek Slewing Ring Bearings | J6:106 mm; Recommended diameter for attachment bolts, inch G:0.5 in; RG:1/4-28 UNF; Thread grub screw G2:M6x0.75; A3:3.2 mm; J:130 mm; s1:25.4 mm; Limiting speed:1100 r/min; A5:22 mm; Hexagonal key size for grub screw N:3 mm; Housing material:Cast iron; B4:6 mm; Db1:88 mm; Recommended diameter for attachment bolts, mm G:12 mm; Rα:45 °; A:34.5 mm; L:96 mm; R1:22 mm; N:14 mm; H:156 mm; |