| M5-26P1 Rotek Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:143000 N; Grease Speed Rating Open/Shielded n1:3800 rpm; d:70.000 mm; Sealed Speed Rating n3:2600 rpm; B:42.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Static Radial Load Rating Co:104000 N; Accessories:Two Shields; Fillet Radius ra:2.50 mm; D:180.0000 mm; |
| 3R8-88E9 Rotek Slewing Ring Bearings | Calculation factor Y2:2.9; Basic static load rating C0:36500 kN; Thrust factor K:1.68; Comparative radial load rating CF:3250 kN; d1 ≈:772 mm; r3,4 min.:6.4 mm; D1 ≈:872 mm; Comparative axial load rating CFa:554 kN; r1,2 min.:3.3 mm; d:717.55 mm; Calculation factor Y1:1.9; D:946.15 mm; Fatigue load limit Pu:2400 kN; B:565.15 mm; Mass bearing:1047 kg; Design variant/feature:TQOSN/GWSI; Basic dynamic load rating C:13400 kN; |
| A12-27E3 Rotek Slewing Ring Bearings | Basic dynamic load rating C:616 kN; r3,4 min.:0.6 mm; D3:196 mm; Snap ring in accordance with DIN 471:200x4; D:200 mm; d:130 mm; -:0.2 mm; Ca2:75 mm; Mass bearing:10.5 kg; das:150 mm; K:4 mm; Fatigue load limit Pu:120 kN; +:0.2 mm; C2:5.4 mm; C1:83.2 mm; C:94 mm; b:4.2 mm; Limiting speed:630 r/min; Calculation factor kr:0.4; da min.:137 mm; |
| 3R8-88N9 Rotek Slewing Ring Bearings | Tolerance housing:H7; Coefficient of friction µ min.:0.05; D:95 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; B:80 mm; Specific static load factor K0:20 N/mm²; Mass bushing:1.04 kg; d:80 mm; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; |
| W13-49P1 Rotek Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:216000 N; Accessories:One Shield & Snap-Ri; Fillet Radius ra:2.00 mm; D:310.0000 mm; Grease Speed Rating Open/Shielded n1:1900 rpm; Oil Speed Rating Open/Shielded n2:2400 rpm; d:200.000 mm; Basic Static Radial Load Rating Co:245000 N; B:51.00 mm; Sealed Speed Rating n3:1300 rpm; |
| A14-31P3 Rotek Slewing Ring Bearings | Calculation factor f2A:1; Preload class B GB:250 N; Static axial stiffness, preload class A:46 N/µm; Calculation factor f0:8.2; Ball diameter Dw:7.938 mm; d2:57.9 mm; Basic static load rating C0:10.6 kN; ra max.:1 mm; B:16 mm; Number of balls z:21; r1,2 min.:1 mm; db min.:54.6 mm; rb max.:0.6 mm; Db max.:75.8 mm; Static axial stiffness, preload class B:72 N/µm; Calculation factor f2C:1.05; |
| 3R6-63E9 Rotek Slewing Ring Bearings | G2:G 1/8; d1:630 mm; Mass adapter sleeve assembly:340 kg; B1:456 mm; B5:131 mm; G:Tr 670x6; A:8 mm; d:670 mm; G3:13 mm; d3:850 mm; B:106 mm; Hydraulic nut:HMV 134E; |
| 3R6-79E9 Rotek Slewing Ring Bearings | G:39.7 mm; Threads per inch:18; B4:12.598 mm; d3 max.:57.277 mm; Mass adapter sleeve assembly:0.19 kg; d1:31.75 mm; B1:37.948 mm; Sleeve:S 8x1.1/4; B:11.379 mm; d:40 mm; |
| 162.20.0450.890.11.1503 Standard 5 Slewing Ring Bearings | Accessories:Shield & Seal; B:73.00 mm; Basic Static Radial Load Rating Co:196000 N; Sealed Speed Rating n3:2000 rpm; Grease Speed Rating n1:2000 rpm; D:190.0000 mm; Oil Speed Rating n2:3000 rpm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:212000 N; d:90.000 mm; |
| 3R10-82E3C Rotek Slewing Ring Bearings | h:60.325 mm; Cap bolt:4 x 3/4-10 UNC; H:377.825 mm; R1:114.3 mm; H2:76.2 mm; J min.:530.225 mm; ba:75.406 mm; End plug (suffix Y):EPR 19; Eye bolt:2 x 3/8-16 UNC; J1:117.475 mm; L:679.45 mm; P60°:234 kN; J max.:600.075 mm; R2:41.275 mm; S:4.763 mm; Pa:46.3 kN; Labyrinth ring:2 x LOR 148; N1:28.575 mm; Initial grease fill:1304.1 g; Mass pillow block:137 kg; |