| R9-63E3 Rotek Slewing Ring Bearings | d:4.000 mm; Sealed Speed Rating n3:30000 rpm; Basic Static Radial Load Rating Co:600 N; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:50000 rpm; Accessories:Two Seals; D:16.0000 mm; B:5.00 mm; Grease Speed Rating Open/Shielded n1:43000 rpm; Basic Dynamic Radial Load Rating C:1470 N; |
| A24-119E11A Rotek Slewing Ring Bearings | H:124 mm; s1:19.8 mm; Basic static load rating C0:7.8 kN; L:70 mm; N:12.3 mm; B:34.1 mm; A5:26 mm; Basic dynamic load rating C:14 kN; Housing material:Composite for food a; T:38.8 mm; J:99 mm; Recommended tightening torque for grub screw:4 N·m; A:30 mm; Bearing:YAR 205-015-2RF/VE49; Limiting speed:7000 r/min; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended diameter for attachment bolts, mm G:10 mm; |
| A12-47P2 Rotek Slewing Ring Bearings | Limiting speed:430 r/min; D:680 mm; Mass bearing:39 kg; Db max.:667 mm; Basic static load rating C0:2360 kN; s max.:5 mm; D1 ≈:643 mm; da min.:573 mm; d1 ≈:603 mm; E:655 mm; Da max.:667 mm; d:560 mm; das:597 mm; Basic dynamic load rating C:1020 kN; Fatigue load limit Pu:186 kN; Calculation factor e:0.2; Calculation factor kr:0.1; ra max.:2.5 mm; Reference speed:340 r/min; B:56 mm; |
| A8-25N2 Rotek Slewing Ring Bearings | B:14 mm; D1:62 mm; r1,2 min.:1.5 mm; Mass housing washer:1.11 kg; D:130 mm; |
| L6-37P9ZD Rotek Slewing Ring Bearings | P120°:44.5 kN; P150°:40 kN; J1:60.325 mm; N1:22.225 mm; Labyrinth ring:2 x LOR 112; Cap bolt recommended tightening torque:203.4 N·m; Da:180 mm; Max. speed for PosiTrac Plus seal:1350 r/min; Pa:16.7 kN; End plug (suffix Y):EPR 14; H:217.488 mm; Appropriate attachment bolt size G:0.75 in; H2:44.45 mm; J min.:295.275 mm; PG:1/4 NPT; L:387.35 mm; Ca:55.804 mm; R2:30.163 mm; Cap bolt, SAE grade:5; |
| A14-43P1 Rotek Slewing Ring Bearings | Basic static load rating C0:57 kN; C1 max.:13.5 mm; l3 min.:30 mm; l4 max.:106 mm; d2 max.:54 mm; l5 ≈:16 mm; w:24 mm; d:20 mm; Material constant KM:330; dk:29 mm; l7 min.:24 mm; Basic dynamic load rating C:30 kN; G:M 20x1.5; h1:77 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:0.3 mm; d4 ≈:28 mm; Mass rod end:0.34 kg; B:16 mm; α:9 °; |
| W13-24P1 Rotek Slewing Ring Bearings | h:2 mm; Associated spanner:HN 4; d1:26 mm; Recommended grub screw tightening torque:4.5 N·m; d3:32 mm; Grub (set) screw size:M5; b:4 mm; B:9.5 mm; Axial static load carrying capacity:24 kN; Mass lock nut:0.034 kg; B3:1 mm; G:M 20x1; |
| M4-38P4Z Rotek Slewing Ring Bearings | B4:32.537 mm; d:190 mm; B1:133.375 mm; B:28.829 mm; Sleeve:S 38x6.7/8; d1:174.625 mm; Hydraulic nut:HMVC 38E; d3 max.:240.64 mm; Mass adapter sleeve assembly:10.5 kg; Threads per inch:8; G:189.789 mm; |
| L6-25P9Z Rotek Slewing Ring Bearings | B:60.00 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:305000 N; D:265.0000 mm; Grease Speed Rating n1:2500 rpm; d:100.000 mm; Oil Speed Rating n2:3100 rpm; Basic Dynamic Radial Load Rating C:260000 N; |
| A14-34E31 Rotek Slewing Ring Bearings | Static axial stiffnes:930 N/µm; d2:49.2 mm; Static moment stiffness:400 N·m/mrad; Mass bearing:1.13 kg; r1,2 min.:0.3 mm; Basic dynamic load rating C:47.5 kN; N:8.8 mm; Da max.:62 mm; Number of attachment bolts:7; H1:25 mm; Attainable speed:2600 r/min; Required attachment bolt size (DIN 912):M8; d:35 mm; Fatigue load limit Pu:3.7 kN; da min.:45 mm; Angle between holes in outer ring (Pitch) α:45 °; |