| L9-46E9Z Rotek Slewing Ring Bearings | d:760 mm; r3,4 min.:7.5 mm; B:790 mm; F:846 mm; Mass bearing:2440 kg; Calculation factor kr:760; r1,2 min.:7.5 mm; Basic static load rating C0:65500 kN; b:22.3 mm; Design variant/feature:BC4.10/W33WI; C:790 mm; K:12 mm; Fatigue load limit Pu:4400 kN; Basic dynamic load rating C:23800 kN; D1 ≈:974 mm; D:1080 mm; |
| L6-43N9ZD Rotek Slewing Ring Bearings | d:30.000 mm; Sealed Speed Rating n3:7500 rpm; Basic Static Radial Load Rating Co:11200 N; Grease Speed Rating Open/Shielded n1:10000 rpm; Basic Dynamic Radial Load Rating C:19500 N; Oil Speed Rating Open/Shielded n2:13000 rpm; Grease Speed Rating n1:10000 rpm; D:62.0000 mm; B:16.00 mm; Oil Speed Rating n2:13000 rpm; Accessories:One Seal; Fillet Radius ra:1.00 mm; |
| W14-71P1 Rotek Slewing Ring Bearings | Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:8500 rpm; Basic Dynamic Radial Load Rating C:33200 N; Basic Static Radial Load Rating Co:19000 N; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:6000 rpm; Oil Speed Rating n2:10000 rpm; D:80.0000 mm; d:35.000 mm; B:21.00 mm; Grease Speed Rating n1:8500 rpm; Oil Speed Rating Open/Shielded n2:10000 rpm; |
| 3R8-98E9 Rotek Slewing Ring Bearings | Calculation factor kr:0.25; Basic dynamic load rating C:2380 kN; Reference speed:500 r/min; d:380 mm; da min.:398 mm; K:5 mm; D1 ≈:469 mm; d1 ≈:430 mm; r1,2 min.:4 mm; Fatigue load limit Pu:500 kN; Limiting speed:630 r/min; D:520 mm; b1:9.4 mm; Da max.:502 mm; Basic static load rating C0:5700 kN; das:414 mm; B:140 mm; ra max.:3 mm; Mass bearing:92.4 kg; |
| 161.16.0400.890.11.1503 Standard 5 Slewing Ring Bearings | Calculation factor f2C:1.05; Da max.:57.4 mm; Calculation factor f1:1; Basic dynamic load rating C:15.6 kN; D:62 mm; Db max.:60 mm; Preload class A GA:60 N; Static axial stiffness, preload class C:64 N/µm; ra max.:1 mm; a:13.6 mm; d2:43.7 mm; da min.:39.6 mm; B:14 mm; Static axial stiffness, preload class A:36 N/µm; r1,2 min.:1 mm; D1:53.3 mm; Preload class C GC:240 N; Calculation factor fHC:1; |
| L6-33E9ZD Rotek Slewing Ring Bearings | D:160 mm; Limiting speed:4000 r/min; Mass bearing:3.98 kg; Fatigue load limit Pu:35.5 kN; rb max.:3 mm; a:53.377 mm; r1,2 min.:3 mm; Dimension series:7FC; Da min.:121 mm; Da max.:148 mm; Calculation factor e:0.88; d1 ≈:125.55 mm; Reference speed:3000 r/min; T:45 mm; d:80 mm; Basic static load rating C0:315 kN; da max.:94 mm; B:41 mm; Cb min.:14 mm; ra max.:3 mm; |
| L9-49E9Z Rotek Slewing Ring Bearings | B:29 mm; Cb min.:6.5 mm; C:25 mm; Ca min.:4 mm; r3,4 min.:2 mm; db min.:66.5 mm; Mass bearing:1.56 kg; rb max.:2 mm; Calculation factor e:0.35; a:23.986 mm; D:120 mm; Fatigue load limit Pu:19.3 kN; d1 ≈:84 mm; Basic dynamic load rating C:176 kN; Dimension series:2FB; Da max.:110.5 mm; T:31.5 mm; d:55 mm; ra max.:2.5 mm; r1,2 min.:2.5 mm; |
| A14-48E22 Rotek Slewing Ring Bearings | R2:31.75 mm; Stabilizing ring:SR-22-19; db:123.825 mm; P90°:89 kN; H1:125.425 mm; L:419.1 mm; P60°:149 kN; S:4.763 mm; Cap bolt, SAE grade:5; Ca:62.789 mm; Initial grease fill:481.95 g; End plug (suffix Y):EPR 14; Labyrinth ring (db shaft position):LOR 121; Pa:39.6 kN; N1:22.225 mm; A1:120.65 mm; A2:165.1 mm; Cap bolt:2 x 3/4-10 UNC; R1:67.866 mm; PosiTrac Plus contact element (dc shaft position):B10724-113; |
| L9-49P9Z Rotek Slewing Ring Bearings | s:22 mm; ATS:360 mm; P180°:2400 kN; Labyrinth seal:2 x TS 60/10.7/16; N1:42 mm; J1:190 mm; P120°:2200 kN; H:591 mm; Ca:196 mm; N:50 mm; P150°:1900 kN; ba max.:170 mm; Q120°:2860 kN; Q150°:1650 kN; bc:175.5 mm; P55°:6000 kN; End cover:ETS 60; Initial grease fill, 20%:3.9 kg; Eye bolt, size:2 x M 30; bb:129 mm; |
| R8-35N3 Rotek Slewing Ring Bearings | D:140.0000 mm; d:65.000 mm; Sealed Speed Rating n3:3200 rpm; Accessories:Two Shields & Snap-R; Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:163000 N; B:61.90 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:154000 N; Grease Speed Rating n1:3200 rpm; |