| 3R8-110N1 Rotek Slewing Ring Bearings | R2:42.069 mm; Initial grease fill:1672.65 g; P90°:249 kN; S:4.763 mm; Ca:101.803 mm; P120°:151 kN; h:61.913 mm; Da:339.999 mm; Labyrinth ring:2 x LOR 154; RG:1 NPT; Pa:52.5 kN; A1:190.5 mm; Housing:SSAFS 538; H2:79.375 mm; Eye bolt:2 x 1/2-13 UNC; A2:276.225 mm; H1:200.025 mm; P60°:416 kN; L:711.2 mm; Cap bolt:1 1/8-7 UNC; |
| 161.16.0400.890.11.1503 Standard 5 Slewing Ring Bearings | Calculation factor f2C:1.05; Da max.:57.4 mm; Calculation factor f1:1; Basic dynamic load rating C:15.6 kN; D:62 mm; Db max.:60 mm; Preload class A GA:60 N; Static axial stiffness, preload class C:64 N/µm; ra max.:1 mm; a:13.6 mm; d2:43.7 mm; da min.:39.6 mm; B:14 mm; Static axial stiffness, preload class A:36 N/µm; r1,2 min.:1 mm; D1:53.3 mm; Preload class C GC:240 N; Calculation factor fHC:1; |
| 60.22.0370.301.11.1504 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:51000 N; D:140.0000 mm; d:90.000 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; Basic Dynamic Radial Load Rating C:61800 N; Sealed Speed Rating n3:2800 rpm; B:24.00 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Fillet Radius ra:1.50 mm; Accessories:Seal & Snap-Ring; |
| L6-33E9Z Rotek Slewing Ring Bearings | Dynamic (Cr):3 mm; Oil:120.650 kN; Pu:657 kN; Grease:1160 kN; D:210 mm; with tapered bore:1 200 min-1; B:80 mm; with cylindrical bore:900 min-1; d:130 mm; Static (Cor):5.5 mm; rs (min):2 mm; |
| L6-29N9ZD Rotek Slewing Ring Bearings | B:41.00 mm; Basic Static Radial Load Rating Co:146000 N; Grease Speed Rating Open/Shielded n1:3100 rpm; Basic Dynamic Radial Load Rating C:147000 N; d:85.000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; D:180.0000 mm; Fillet Radius ra:2.50 mm; Accessories:Snap-Ring; |
| L6-37N9Z Rotek Slewing Ring Bearings | G:M 30x1.5; Mass adapter sleeve assembly:0.11 kg; d:30 mm; d1:25.4 mm; d3:45 mm; B:10.5 mm; B1:31 mm; |
| A14-43P1 Rotek Slewing Ring Bearings | Basic static load rating C0:57 kN; C1 max.:13.5 mm; l3 min.:30 mm; l4 max.:106 mm; d2 max.:54 mm; l5 ≈:16 mm; w:24 mm; d:20 mm; Material constant KM:330; dk:29 mm; l7 min.:24 mm; Basic dynamic load rating C:30 kN; G:M 20x1.5; h1:77 mm; Specific dynamic load factor K:100 N/mm²; r1 min.:0.3 mm; d4 ≈:28 mm; Mass rod end:0.34 kg; B:16 mm; α:9 °; |
| A24-119E11A Rotek Slewing Ring Bearings | H:124 mm; s1:19.8 mm; Basic static load rating C0:7.8 kN; L:70 mm; N:12.3 mm; B:34.1 mm; A5:26 mm; Basic dynamic load rating C:14 kN; Housing material:Composite for food a; T:38.8 mm; J:99 mm; Recommended tightening torque for grub screw:4 N·m; A:30 mm; Bearing:YAR 205-015-2RF/VE49; Limiting speed:7000 r/min; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended diameter for attachment bolts, mm G:10 mm; |
| 3R6-49P9 Rotek Slewing Ring Bearings | d:90 mm; d3 max.:118.389 mm; B1:66.954 mm; B:17.729 mm; G:89.586 mm; B4:19.863 mm; d1:77.787 mm; Threads per inch:12; Sleeve:S 18x3.1/16; Hydraulic nut:HMVC 18E; Mass adapter sleeve assembly:1.4 kg; |
| R8-42N3 Rotek Slewing Ring Bearings | Housing:SAF 620; A2:187.325 mm; P90°:111 kN; N1:22.225 mm; Cap bolt:2 x 1-8 UNC; PosiTrac Plus contact element:2 x B10724-102; Mass pillow block:45.9 kg; A1:120.65 mm; Appropriate attachment bolt size G:0.75 in; Initial grease fill:765.45 g; Pa:14 kN; H1:133.35 mm; Cap bolt recommended tightening torque:1220 N·m; Ca:82.804 mm; Cap bolt, SAE grade:8; H2:53.975 mm; Da:215.001 mm; J1:69.85 mm; |