| L9-49N9Z Rotek Slewing Ring Bearings | bb:98 mm; P150°:1400 kN; Ca:148 mm; P55°:4200 kN; J6:650 mm; Q180°:1430 kN; H1:240 mm; da:260 mm; J:600 mm; db:280 mm; Q120°:2860 kN; s:12 mm; d2:418 mm; Eye bolt, size:2 x M 24; Da:400 mm; A1:260 mm; N:42 mm; Initial grease fill, 40%:3.9 kg; |
| L9-57N9Z Rotek Slewing Ring Bearings | B:180 mm; Specific dynamic load factor K:140 N/mm²; D:180 mm; Tolerance shaft:h8; Coefficient of friction µ max.:0.08; Coefficient of friction µ min.:0.03; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; Mass bushing:1.8 kg; Effective load carrying cross section A:28480 mm²; Specific static load factor K0:200 N/mm²; |
| 3R8-110N1 Rotek Slewing Ring Bearings | R2:42.069 mm; Initial grease fill:1672.65 g; P90°:249 kN; S:4.763 mm; Ca:101.803 mm; P120°:151 kN; h:61.913 mm; Da:339.999 mm; Labyrinth ring:2 x LOR 154; RG:1 NPT; Pa:52.5 kN; A1:190.5 mm; Housing:SSAFS 538; H2:79.375 mm; Eye bolt:2 x 1/2-13 UNC; A2:276.225 mm; H1:200.025 mm; P60°:416 kN; L:711.2 mm; Cap bolt:1 1/8-7 UNC; |
| R8-44N3 Rotek Slewing Ring Bearings | Spring washer in accordance with DIN 128:A 16; M1:5 mm; M:15 mm; B:36 mm; Hexagonal head bolt:M 16x30; M2:53 mm; Mass locking clip:0.11 kg; M3:18 mm; |
| W13-24P1 Rotek Slewing Ring Bearings | h:2 mm; Associated spanner:HN 4; d1:26 mm; Recommended grub screw tightening torque:4.5 N·m; d3:32 mm; Grub (set) screw size:M5; b:4 mm; B:9.5 mm; Axial static load carrying capacity:24 kN; Mass lock nut:0.034 kg; B3:1 mm; G:M 20x1; |
| H7-38E1 Rotek Slewing Ring Bearings | ba:72.231 mm; A2:288.925 mm; Pa:60.9 kN; R1:104.775 mm; P150°:78.3 kN; db:149.225 mm; P120°:85.9 kN; P90°:136 kN; Cap bolt:4 x 3/4-10 UNC; End plug (suffix Y):EPR 27; h:61.913 mm; da:130 mm; A1:158.75 mm; Max. speed for Taconite seal:520 r/min; Cap bolt, SAE grade:5; J max.:488.95 mm; H:336.55 mm; Taconite seal (db shaft position):TER 136; Housing:SAF 326; N1:28.575 mm; |
| M4-34P4 Rotek Slewing Ring Bearings | N1:25.4 mm; R2:30.163 mm; Housing:SAF 520; A2:152.797 mm; Stabilizing ring:2 x SR-1520; Mass pillow block:28.1 kg; P150°:46.3 kN; Max. speed for PosiTrac Plus seal:1650 r/min; H:217.488 mm; Da:180 mm; End plug (suffix Y):EPR 12; da:87.313 mm; Cap bolt recommended tightening torque:203.4 N·m; ba:38.894 mm; R1:58.737 mm; Ca:55.804 mm; Cap bolt, SAE grade:5; L:387.35 mm; P90°:81.4 kN; Appropriate attachment bolt size G:0.875 in; |
| 230.20.0400.503 Type 21/520. Standard 5 Slewing Ring Bearings | Fillet Radius ra:1.00 mm; d:17.000 mm; B:17.00 mm; D:62.0000 mm; Grease Speed Rating Open/Shielded n1:12000 rpm; Basic Dynamic Radial Load Rating C:22900 N; Basic Static Radial Load Rating Co:10800 N; Oil Speed Rating Open/Shielded n2:15000 rpm; Accessories:Snap-Ring; Sealed Speed Rating n3:8500 rpm; |
| A9-24P2 Rotek Slewing Ring Bearings | b:2.8 mm; Calculation factor f2B:1.02; Static axial stiffness, preload class C:185 N/µm; Fatigue load limit Pu:2.65 kN; C3:3.8 mm; Basic dynamic load rating C:67.6 kN; Da max.:124 mm; r1,2 min.:1.1 mm; Static axial stiffness, preload class A:97 N/µm; Attainable speed for oil-air lubrication:16000 r/min; Static axial stiffness, preload class B:132 N/µm; C1:11.1 mm; Static axial stiffness, preload class D:268 N/µm; |
| 3R16-197E2 Rotek Slewing Ring Bearings | rs (min):5 mm; D:620 mm; B:200 mm; with cylindrical bore:400 min-1; d:440 mm; Static (Cor):22.3 mm; with tapered bore:500 min-1; Grease:8820 kN; Oil:656.000 kN; Dynamic (Cr):12 mm; Pu:4480 kN; |