| 230.21.0475.013 Type 21/520. Standard 5 Slewing Ring Bearings | Mass bearing unit:8.62 kg; H1:69.85 mm; J1:47.625 mm; J max.:225.425 mm; Basic dynamic load rating C:193 kN; H:144.463 mm; A:88.9 mm; da:63.5 mm; Limiting speed:3100 r/min; H2:41.275 mm; J min.:209.55 mm; Attachment bolt diameter G:15.875 mm; S:0.794 mm; B:65.484 mm; L:266.7 mm; s:32.941 mm; |
| M5-30P1Z Rotek Slewing Ring Bearings | Basic dynamic load rating C:400 kN; B:55 mm; C1 max.:48 mm; Specific dynamic load factor K:100 N/mm²; d4 ≈:105 mm; l5 ≈:45 mm; l7 min.:90 mm; d2 max.:182 mm; l4 max.:324 mm; d:80 mm; w:90 mm; Basic static load rating C0:655 kN; Mass rod end:15 kg; l3 min.:85 mm; r1 min.:1 mm; α:5 °; dk:105 mm; h1:230 mm; G:M 64x4; Material constant KM:330; |
| 3R6-71E9 Rotek Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:6200 rpm; D:90.0000 mm; Basic Static Radial Load Rating Co:36000 N; d:40.000 mm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Basic Dynamic Radial Load Rating C:46800 N; B:23.00 mm; |
| A12-42E3 Rotek Slewing Ring Bearings | Basic Static Radial Load Rating Co:193000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3400 rpm; B:40.00 mm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:199000 N; Fillet Radius ra:2.00 mm; d:120.000 mm; D:215.0000 mm; |
| 232.20.0400.013 Type 21/520.2 Standard 5 Slewing Ring Bearings | H1:49.2 mm; Bearing:YAR 208-108-2RF/VE49; H:100.5 mm; Fatigue load limit Pu:0.8 kN; A1:35 mm; B:49.2 mm; A:48 mm; Thread grub screw G2:5/16-24 UNF; d:38.1 mm; Mass bearing unit:0.97 kg; Thread size attachement end G:M12; s1:30.2 mm; Basic dynamic load rating C:30.7 kN; Housing material:Composite for food a; Recommended tightening torque for grub screw:6.5 N·m; Hexagonal key size for grub screw N:3.969 mm; |
| M5-31P1Z Rotek Slewing Ring Bearings | Cap bolt, SAE grade:8; Pa:9.43 kN; L:361.95 mm; A2:233.363 mm; Mass pillow block:29.8 kg; Appropriate attachment bolt size G:0.625 in; A1:98.425 mm; P150°:30.7 kN; P60°:93 kN; Taconite seal:TER 44; R1:63.5 mm; Stabilizing ring:2 x SR-1616; Initial grease fill:365.71 g; N1:19.05 mm; ba:36.513 mm; End plug (suffix Y):EPR 10; Cap bolt:2 x 3/4-10 UNC; Max. speed for Taconite seal:1150 r/min; da:68.263 mm; |
| A16-78E4 Rotek Slewing Ring Bearings | B:2 mm; Basic dynamic load rating C:0.178 kN; Limiting speed:95000 r/min; da min.:4.6 mm; d1 ≈:4.75 mm; Calculation factor kr:0.015; ra max.:0.1 mm; Basic static load rating C0:0.057 kN; Mass bearing:0.0002 kg; r1,2 min.:0.1 mm; D1 ≈:6.25 mm; D:7 mm; Da max.:6.4 mm; Calculation factor f0:7.3; Reference speed:150000 r/min; Fatigue load limit Pu:0.003 kN; d:4 mm; |
| A10-35N1L Rotek Slewing Ring Bearings | d:90.000 mm; Basic Dynamic Radial Load Rating C:198000 N; D:225.0000 mm; Grease Speed Rating Open/Shielded n1:2500 rpm; B:54.00 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Fillet Radius ra:3.00 mm; Accessories:Snap-Ring; Basic Static Radial Load Rating Co:212000 N; |
| 3R6-49N9 Rotek Slewing Ring Bearings | Static axial stiffness, preload class A:46 N/µm; Calculation factor f0:8.2; Calculation factor f1:1; ra max.:1 mm; r3,4 min.:0.6 mm; B:16 mm; Static axial stiffness, preload class C:98 N/µm; db max.:57.3 mm; Preload class A GA:85 N; d1:60.25 mm; da min.:54.6 mm; Static axial stiffness, preload class B:72 N/µm; db min.:54.6 mm; Da max.:75.4 mm; Attainable speed for grease lubrication:30000 r/min; |
| 232.20.0400.503 Type 21/520.2 Standard 5 Slewing Ring Bearings | D1 ≈:50.8 mm; B:16 mm; Calculation factor Y1:0.66; b:4.5 mm; d:30 mm; D:62 mm; Fatigue load limit Pu:1.29 kN; Calculation factor Y2:1.07; da min.:35.6 mm; Calculation factor A:0.00256; Calculation factor X:0.6; Mass bearing:0.24 kg; r0:0.5 mm; ra max.:1 mm; Basic dynamic load rating C:37.5 kN; a:32 mm; Limiting speed:19000 r/min; r1,2 min.:1 mm; d1 ≈:37.5 mm; h:3.5 mm; |