| L6-25P9Z Rotek Slewing Ring Bearings | B:60.00 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:305000 N; D:265.0000 mm; Grease Speed Rating n1:2500 rpm; d:100.000 mm; Oil Speed Rating n2:3100 rpm; Basic Dynamic Radial Load Rating C:260000 N; |
| 3R6-49P9 Rotek Slewing Ring Bearings | d:90 mm; d3 max.:118.389 mm; B1:66.954 mm; B:17.729 mm; G:89.586 mm; B4:19.863 mm; d1:77.787 mm; Threads per inch:12; Sleeve:S 18x3.1/16; Hydraulic nut:HMVC 18E; Mass adapter sleeve assembly:1.4 kg; |
| 162.16.0400.891.21.1503 Standard 5 Slewing Ring Bearings | Static axial stiffness, preload class D:214 N/µm; r3,4 min.:0.3 mm; Basic dynamic load rating C:15.9 kN; Reference grease quantity Gref:2.4 cm³; Static axial stiffness, preload class C:162 N/µm; Calculation factor e:0.68; Ball diameter Dw:7.938 mm; Preload class B GB:200 N; Calculation factor f2C:1.05; Calculation factor f2D:1.08; Db max.:66 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; |
| A24-107N1 Rotek Slewing Ring Bearings | Da:259.999 mm; H1:152.4 mm; P150°:105 kN; A1:149.225 mm; P60°:301 kN; h:44.45 mm; Mass pillow block:92 kg; Labyrinth ring:2 x LOR 140; Cap bolt recommended tightening torque:813.5 N·m; Housing:SSAFS 034 KA; P120°:116 kN; Ca:86.614 mm; Bearing limiting speed:2800 r/min; Pa:34 kN; P90°:180 kN; ba:64.294 mm; Cap bolt, SAE grade:8; L:511.175 mm; Initial grease fill:481.95 g; R1:87.313 mm; |
| L9-38E9Z Rotek Slewing Ring Bearings | A1:149.225 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt recommended tightening torque:813.5 N·m; End plug (suffix Y):EPR 18; Initial grease fill:481.95 g; Stabilizing ring:2 x SR-0-24; A2:260.35 mm; Cap bolt:7/8-9 UNC; Max. speed for Taconite seal:520 r/min; L:511.175 mm; J1:85.725 mm; P150°:105 kN; P90°:180 kN; Mass pillow block:87.5 kg; J max.:434.975 mm; Pa:34 kN; Housing:SAFS 034 KA; PG:1/4 NPT; |
| R9-59N3 Rotek Slewing Ring Bearings | Limiting speed:1400 r/min; Mass bearing + sleeve:109 kg; d2 ≈:301 mm; b:16.7 mm; B1:190 mm; Basic dynamic load rating C:2664 kN; K:9 mm; Calculation factor Y2:3.3; d1:240 mm; Fatigue load limit Pu:290 kN; D1 ≈:380 mm; Ba min.:11 mm; Reference speed:1100 r/min; Da max.:423 mm; B4:39 mm; Calculation factor e:0.31; r1,2 min.:4 mm; ra max.:3 mm; Calculation factor Y0:2.2; D:440 mm; |
| 3R8-68N3B Rotek Slewing Ring Bearings | Limiting speed:8500 r/min; Ew:60 mm; Basic dynamic load rating C:35.8 kN; Fatigue load limit Pu:12 kN; U:27 mm; Fw:55 mm; Reference speed:7500 r/min; Basic static load rating C0:96.5 kN; Mass needle roller and cage assembly:0.06 kg; |
| M4-34P4Z Rotek Slewing Ring Bearings | Housing:FSAF 520; R2:30.163 mm; L:387.35 mm; Max. speed for PosiTrac Plus seal:1650 r/min; Initial grease fill:365.71 g; End plug (suffix Y):EPR 12; Labyrinth ring:2 x LOR 100; J1:60.325 mm; H2:44.45 mm; J min.:295.275 mm; PosiTrac Plus contact element:2 x B10724-102; Appropriate attachment bolt size G:0.75 in; P150°:40 kN; PG:1/4 NPT; ba:38.894 mm; Pa:10.2 kN; Cap bolt, SAE grade:5; da:84.138 mm; |
| 3R10-85N2A Rotek Slewing Ring Bearings | d:30 mm; G:M 30x1.5; B1:31 mm; Mass adapter sleeve assembly:0.13 kg; d3:45 mm; d1:23.813 mm; B:10.5 mm; |
| S8-50E1 Rotek Slewing Ring Bearings | P90°:55.6 kN; J min.:269.875 mm; H1:107.95 mm; P150°:30.7 kN; Housing:FSAF 316; P120°:33.8 kN; J1:53.975 mm; Cap bolt, SAE grade:8; H:209.55 mm; R2:26.988 mm; Appropriate attachment bolt size G:0.625 in; N1:19.05 mm; PG:1/8 NPT; P180°:36.9 kN; Bearing limiting speed:5300 r/min; Pa:23.6 kN; Labyrinth ring (dc shaft position):LOR 60; db:92.075 mm; Ca:67.793 mm; Cap bolt:2 x 5/8-11 UNC; |