| R8-30E3 Rotek Slewing Ring Bearings | d:25 mm; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; Tolerance housing:H7; Tolerance shaft:h8; Mass bushing:0.24 kg; Permissible sliding velocity v max.:5 m/s; D:45 mm; B:35 mm; Specific static load factor K0:20 N/mm²; |
| A10-43N28D Rotek Slewing Ring Bearings | Cap bolt recommended tightening torque:61 N·m; J min.:158.75 mm; N1:15.875 mm; End plug (suffix Y):EPR 3; Max. speed for contact seal:4000 r/min; Appropriate attachment bolt size G:0.5 in; S:2.778 mm; A1:60.325 mm; PG:1/8 NPT; Cap bolt:2 x 7/16-14 UNC; H:112.713 mm; ba:24.606 mm; P90°:12.5 kN; H2:20.637 mm; A2:88.9 mm; da:36.513 mm; RG:1/8 NPT; R1:28.575 mm; H1:57.15 mm; Housing:SAF 509; |
| S8-50E1 Rotek Slewing Ring Bearings | P90°:55.6 kN; J min.:269.875 mm; H1:107.95 mm; P150°:30.7 kN; Housing:FSAF 316; P120°:33.8 kN; J1:53.975 mm; Cap bolt, SAE grade:8; H:209.55 mm; R2:26.988 mm; Appropriate attachment bolt size G:0.625 in; N1:19.05 mm; PG:1/8 NPT; P180°:36.9 kN; Bearing limiting speed:5300 r/min; Pa:23.6 kN; Labyrinth ring (dc shaft position):LOR 60; db:92.075 mm; Ca:67.793 mm; Cap bolt:2 x 5/8-11 UNC; |
| 3R6-49N9 Rotek Slewing Ring Bearings | Static axial stiffness, preload class A:46 N/µm; Calculation factor f0:8.2; Calculation factor f1:1; ra max.:1 mm; r3,4 min.:0.6 mm; B:16 mm; Static axial stiffness, preload class C:98 N/µm; db max.:57.3 mm; Preload class A GA:85 N; d1:60.25 mm; da min.:54.6 mm; Static axial stiffness, preload class B:72 N/µm; db min.:54.6 mm; Da max.:75.4 mm; Attainable speed for grease lubrication:30000 r/min; |
| A24-119E11A Rotek Slewing Ring Bearings | H:124 mm; s1:19.8 mm; Basic static load rating C0:7.8 kN; L:70 mm; N:12.3 mm; B:34.1 mm; A5:26 mm; Basic dynamic load rating C:14 kN; Housing material:Composite for food a; T:38.8 mm; J:99 mm; Recommended tightening torque for grub screw:4 N·m; A:30 mm; Bearing:YAR 205-015-2RF/VE49; Limiting speed:7000 r/min; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended diameter for attachment bolts, mm G:10 mm; |
| L6-33E9Z Rotek Slewing Ring Bearings | Dynamic (Cr):3 mm; Oil:120.650 kN; Pu:657 kN; Grease:1160 kN; D:210 mm; with tapered bore:1 200 min-1; B:80 mm; with cylindrical bore:900 min-1; d:130 mm; Static (Cor):5.5 mm; rs (min):2 mm; |
| 3R8-98P9 Rotek Slewing Ring Bearings | T:93 mm; Calculation factor e:0.83; Da min.:151 mm; da max.:110 mm; K:10 mm; rc max.:1 mm; Basic static load rating C0:630 kN; D:190 mm; Calculation factor Y2:1.2; d:90 mm; Fatigue load limit Pu:71 kN; Reference speed:1900 r/min; ra max.:3 mm; Calculation factor Y1:0.81; b:15 mm; r3,4 min.:3 mm; Ca min.:5 mm; Da max.:177.5 mm; 2B:86 mm; Limiting speed:3400 r/min; |
| A20-95N4 Rotek Slewing Ring Bearings | Accessories:Two Shields; Basic Static Radial Load Rating Co:25000 N; d:60.000 mm; Grease Speed Rating Open/Shielded n1:6700 rpm; Sealed Speed Rating n3:4300 rpm; Fillet Radius ra:1.00 mm; B:18.00 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; Basic Dynamic Radial Load Rating C:32500 N; D:95.0000 mm; |
| 62.20.0414.500.01.1503 Standard 5 Slewing Ring Bearings | B:46.00 mm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:1300 rpm; Basic Dynamic Radial Load Rating C:242000 N; d:380.000 mm; Grease Speed Rating Open/Shielded n1:1000 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:365000 N; Sealed Speed Rating n3:0 rpm; D:480.0000 mm; |
| 3R10-85N2A Rotek Slewing Ring Bearings | d:30 mm; G:M 30x1.5; B1:31 mm; Mass adapter sleeve assembly:0.13 kg; d3:45 mm; d1:23.813 mm; B:10.5 mm; |