| W17-108P1 Rotek Slewing Ring Bearings | Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; d:45 mm; Coefficient of friction µ max.:0.1; Specific static load factor K0:20 N/mm²; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; Mass bushing:0.098 kg; D:51 mm; B:35 mm; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; |
| L9-53N9Z Rotek Slewing Ring Bearings | Tolerance shaft:e7; a:5 mm; Permissible sliding velocity v max.:0.5 m/s; h:76.5 mm; Tolerance housing:H7; Specific static load factor K0:45 N/mm²; α:124 °; Mass bushing:1.7 kg; B:100 mm; D:90 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.15; Specific dynamic load factor K:25 N/mm²; d:75 mm; |
| S22-140E1 Rotek Slewing Ring Bearings | d1:145 mm; G:M 160x3; Calculation factor Y1:2.3; Calculation factor e:0.3; b:11.1 mm; Da max.:238 mm; Calculation factor Y0:2.2; Mass bearing + sleeve:17 kg; da min.:158 mm; Calculation factor Y2:3.4; d2 ≈:172 mm; B1:96 mm; K:6 mm; B:80 mm; ra max.:2 mm; Basic static load rating C0:1200 kN; G1:15 mm; B2 ≈:101 mm; r1,2 min.:2.1 mm; Reference speed:2000 r/min; |
| A16-59N2 Rotek Slewing Ring Bearings | Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; D:80 mm; Mass bushing:0.44 kg; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; d:70 mm; B:60 mm; Coefficient of friction µ max.:0.1; |
| A7-38N1 Rotek Slewing Ring Bearings | da min.:55.1 mm; Da max.:75.9 mm; Specific static load factor K0:300 N/mm²; Da min.:72.4 mm; Mass plain bearing:0.93 kg; Design (sliding contact surface combination):Steel/steel; r1 min.:0.6 mm; b:4.8 mm; b1:5 mm; da max.:57.9 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; M:4 mm; Lubricant:Regular relubricatio; ra max.:0.6 mm; d:50.8 mm; B:44.45 mm; r2 min.:1 mm; |
| R9-63N3 Rotek Slewing Ring Bearings | B:16 mm; Associated spanner:HN 15; d1:81.5 mm; d3:98 mm; h:3.5 mm; b:8 mm; Recommended grub screw tightening torque:8 N·m; Grub (set) screw size:M6; Mass lock nut:0.35 kg; G:M 75x2; B3:3 mm; Axial static load carrying capacity:134 kN; |
| L6-37P9Z Rotek Slewing Ring Bearings | Calculation factor Y0:1.8; Calculation factor Y1:1.9; ra max.:2.5 mm; Da max.:246 mm; B4:22 mm; r1,2 min.:3 mm; D:260 mm; d3:155 mm; B:86 mm; b:13.9 mm; Fatigue load limit Pu:100 kN; Basic static load rating C0:1120 kN; Reference speed:2000 r/min; K:7.5 mm; Calculation factor Y2:2.9; D1 ≈:216 mm; Limiting speed:2600 r/min; d2 ≈:152 mm; da max.:152 mm; db min.:131 mm; |
| H8-58E2 Rotek Slewing Ring Bearings | H2:19 mm; Thread grub screw G2:M10x1; J min.:129 mm; J:136 mm; A5:23.5 mm; H:99.5 mm; Basic dynamic load rating C:30.7 kN; Hexagonal key size for grub screw N:5 mm; B1:56.3 mm; L:176 mm; Limiting speed:950 r/min; N1:14.5 mm; Housing material:Composite; d:40 mm; Mass bearing unit:0.97 kg; Fatigue load limit Pu:0.8 kN; A:48 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Basic static load rating C0:19 kN; |
| M5-26P1Z Rotek Slewing Ring Bearings | Specific static load factor K0:300 N/mm²; Material constant KM:330; B:100 mm; b1:10 mm; Specific dynamic load factor K:100 N/mm²; C:85.725 mm; Mass plain bearing:9.8 kg; Sealing solution:Triple-lip seals; Da min.:157 mm; r2 min.:1.1 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; da min.:122.5 mm; Da max.:171 mm; Lubricant:Regular relubricatio; Basic dynamic load rating C:1120 kN; |
| M6-35P1 Rotek Slewing Ring Bearings | Sealed Speed Rating n3:8000 rpm; Oil Speed Rating n2:11000 rpm; D:52.0000 mm; Fillet Radius ra:1.00 mm; B:20.60 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:22900 N; d:25.000 mm; Basic Static Radial Load Rating Co:21200 N; Grease Speed Rating n1:8000 rpm; |