| S24-158E1 Rotek Slewing Ring Bearings | d2 ≈:419 mm; B2 ≈:228 mm; Basic static load rating C0:6800 kN; Calculation factor Y2:3.4; r1,2 min.:5 mm; Calculation factor Y0:2.2; G1:28 mm; Calculation factor e:0.3; d1:360 mm; b:16.7 mm; ra max.:4 mm; Mass bearing + sleeve:170 kg; Calculation factor Y1:2.3; Fatigue load limit Pu:475 kN; Basic dynamic load rating C:3786 kN; Reference speed:670 r/min; B:180 mm; G:Tr 400x5; D1 ≈:497 mm; |
| A16-95N6 Rotek Slewing Ring Bearings | Oil Speed Rating Open/Shielded n2:28000 rpm; B:7.00 mm; D:30.0000 mm; Basic Dynamic Radial Load Rating C:4360 N; Sealed Speed Rating n3:14000 rpm; d:17.000 mm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:2320 N; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:22000 rpm; |
| A18-74E3 Rotek Slewing Ring Bearings | Accessories:One Shield; Oil Speed Rating Open/Shielded n2:16000 rpm; Fillet Radius ra:0.79 mm; Grease Speed Rating Open/Shielded n1:13000 rpm; Sealed Speed Rating n3:9000 rpm; Width Plain B:9.5 mm; d:25.400 mm; Basic Dynamic Radial Load Rating C:10100 N; D:50.8000 mm; Shielded or Sealed B1:12.7 mm; Basic Static Radial Load Rating Co:6000 N; |
| S8-50E1 Rotek Slewing Ring Bearings | P90°:55.6 kN; J min.:269.875 mm; H1:107.95 mm; P150°:30.7 kN; Housing:FSAF 316; P120°:33.8 kN; J1:53.975 mm; Cap bolt, SAE grade:8; H:209.55 mm; R2:26.988 mm; Appropriate attachment bolt size G:0.625 in; N1:19.05 mm; PG:1/8 NPT; P180°:36.9 kN; Bearing limiting speed:5300 r/min; Pa:23.6 kN; Labyrinth ring (dc shaft position):LOR 60; db:92.075 mm; Ca:67.793 mm; Cap bolt:2 x 5/8-11 UNC; |
| W13-24P1 Rotek Slewing Ring Bearings | h:2 mm; Associated spanner:HN 4; d1:26 mm; Recommended grub screw tightening torque:4.5 N·m; d3:32 mm; Grub (set) screw size:M5; b:4 mm; B:9.5 mm; Axial static load carrying capacity:24 kN; Mass lock nut:0.034 kg; B3:1 mm; G:M 20x1; |
| A12-48E12 Rotek Slewing Ring Bearings | Fillet Radius rb:1.00 mm; B:60.00 mm; Oil Speed Rating n2:5400 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:216000 N; d:90.000 mm; D:160.0000 mm; Basic Dynamic Radial Load Rating C:203000 N; Grease Speed Rating n1:3800 rpm; |
| L9-57P9Z Rotek Slewing Ring Bearings | N max.:55 mm; h1:65 mm; l7 min.:26 mm; B:25 mm; G:M 20x1.5; r1 min.:0.6 mm; d2 max.:62 mm; Material constant KM:330; l3 min.:29 mm; N1 max.:20 mm; C1 max.:22 mm; Specific dynamic load factor K:100 N/mm²; Mass rod end:0.66 kg; d4 max.:31 mm; Basic dynamic load rating C:48 kN; Tightening torque bolt with internal hexagon:23 N·m; Basic static load rating C0:69.5 kN; l4 max.:97 mm; α:4 °; |
| M4-26P4 Rotek Slewing Ring Bearings | Design (sliding contact surface combination):Steel/steel; dk:29 mm; d:20 mm; da min.:23 mm; Basic dynamic load rating C:30 kN; rb max.:0.3 mm; M:2 mm; d1 ≈:24 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; Lubricant:Regular relubricatio; b:3.1 mm; Basic static load rating C0:146 kN; r1 min.:0.3 mm; B:24 mm; Da max.:33.2 mm; α:6 °; Specific static load factor K0:500 N/mm²; |
| A7-38N1 Rotek Slewing Ring Bearings | da min.:55.1 mm; Da max.:75.9 mm; Specific static load factor K0:300 N/mm²; Da min.:72.4 mm; Mass plain bearing:0.93 kg; Design (sliding contact surface combination):Steel/steel; r1 min.:0.6 mm; b:4.8 mm; b1:5 mm; da max.:57.9 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; M:4 mm; Lubricant:Regular relubricatio; ra max.:0.6 mm; d:50.8 mm; B:44.45 mm; r2 min.:1 mm; |
| 3R8-88P9 Rotek Slewing Ring Bearings | K:9 mm; Mass bearing:1342 kg; D:870 mm; Fatigue load limit Pu:2850 kN; r3,4 min.:4 mm; F:672 mm; B:640 mm; b:16.7 mm; d:600 mm; α:20 °; r1,2 min.:20 mm; Calculation factor kr:720; Basic static load rating C0:40000 kN; C:640 mm; Basic dynamic load rating C:16800 kN; D1 ≈:786.8 mm; Design variant/feature:BC4.10/W33WI; |